It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

Wi-Fi AP Authentication Ruckus Wireless Configuration

  • Last updated on

To authenticate users connected to Ruckus access points, you must stream the syslog containing the authentication data to the Barracuda CloudGen Firewall.

Reference Devices/Versions: 

  • ZoneDirector 1100 (ZD1106) Version 9.10.0.0 build 21

  • ZoneFlex zf7321-u Access Point):

Step 1. Enable Client Association on the Ruckus Wireless AP

Enable client association in the debug log settings.

  1. Go to Administer > Diagnostics.

  2. In the Debug Logs section, enable Client Association.
  3. Click Apply
    ruckus01.png

Step 2. Enable Syslog Streaming on the Ruckus Wireless AP

  1. Go to Configure > System Log Settings.
  2. Enable the Remote Syslog.
  3. Enter the IP address of the Barracuda CloudGen Firewall. 
    ruckus02.png
  4. Click Apply.

Verify that the Firewall is Receiving the Syslog Data

On the CloudGen Firewall, go to LOGS and verify that the firewall is receiving the syslog data. After a successful authentication, you will see a logged in user <username> with IP <IP address> line in the log. The Wi-Fi access point name is also listed.