We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

FSC Routing

  • Last updated on

The FCS-Series devices allow you to create gateway routes for the WAN, LAN, VPN, and Wi-Fi interfaces. Routes are evaluated by destination and scope (network size) to determine which routes matches. Two routes of the same scope (e.g., /24) cannot be created.

Creating a Gateway Route

Configuration Using the Secure Connector Editor
  1. Go to your cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Double-click to edit the device or FSC template.
  4. In the left menu, click Routing Settings.
  5. Click + to add a gateway route to the System Routes table.
  6. Enter a Name
  7. Select the Interface Name.
  8. Enter the Gateway IP address.
  9. Enter the Target Network Address.
  10. Click OK.
    sca_Routing_01.png
  11. Click OK and Activate.
Configuration Using Web Interface Override

Use the web interface override to temporarily restore connectivity. Correct any misconfigurations on the Control Center beforehand because the configuration on the FSC will be overridden immediately after the configuration lock in the web interface has been released.

  1. Log into the web interface.
  2. Go to the CONFIGURATION > Network page. 
  3. Click Retrieve Lock.
  4. In the NETWORK ROUTES section click + Add Route. The Edit Network Route page opens.
  5. From the Device drop-down list, select WAN.
  6. Enter the Gateway IP address.
  7. Enter 0.0.0.0/0 as the Target Network.
  8. Click Add Route.
  9. On the top of the page, click Activate Configs.
  10. To return to using the configuration stored on the Control Center, click Release Lock.

Deleting a Route

Configuration Using the Secure Connector Editor
  1. Go to your cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Double-click to edit the device or FSC template.
  4. In the left menu, click Routing Settings.
  5. Select the gateway route in the System Routes table, and click the delete icon (delete_icon.png).
  6. Click OK and Activate.
Configuration Using Web Interface Override

Use the web interface override to temporarily restore connectivity. Correct any misconfigurations on the Control Center beforehand because the configuration on the FSC will be overridden immediately after the configuration lock in the web interface has been released.

  1. Log into the web interface.
  2. Go to the CONFIGURATION > Network page. 
  3. Click Retrieve Lock.
  4. In the NETWORK ROUTES section, click Delete for the route you want to remove.
  5. Click OK.
  6. On the top of the page, click Activate Configs.
  7. To return to using the configuration stored on the Control Center, click Release Lock.
Last updated on