We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

How to Create Bi-Directional Access Rules

  • Last updated on

Bi-directional access rules are rules where the source and destination of the rule are used interchangeably. Bi-directional rules must use the action Pass or Map and a static NAT or no source NAT as the Connection Method.

38_bi-dir1-01.png

Create a Pass access rule

  1. Go to CONFIGURATION > Configuration Tree > Box > Virtual Servers > your virtual server > Assigned Services > Firewall > Forwarding Rules.
  2. Click Lock.
  3. Either click the plus icon (+) at the top right of the rule set, or right-click the rule set and select New > Rule.
    FW_Rule_Add01.png
  4. Select Pass or Dst NAT as the action.
  5. Enter a name for the rule. 
  6. Select the Bi-Directional check box.
  7. Specify the following settings that must be matched by the traffic to be handled by the access rule:
    • Source – The source addresses of the traffic.
    • Destination – The destination addresses of the traffic.
    • Service – Select a service object, or select Any for this rule to match for all services.

    bi-directional_access_rule.png

  8. Click OK.
  9. Drag and drop the access rule so that it is the first rule that matches the traffic that you want it to forward. Ensure that the rule is located above the BLOCKALL rule; rules located below the BLOCKALL rule are never executed.
  10. Click Send Changes and Activate.

Additional matching criteria

Additional policies

Last updated on