It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

How to Configure Advanced DHCP Settings

  • Last updated on

In the advanced settings of the DHCP service, you can enable address pool configuration for subnets, specify additional service availability settings, set up HA synchronization, and add DHCP options.

Configure Advanced DHCP Settings

  1. Go to CONFIGURATION Configuration Tree > Box > Virtual Servers > your virtual server > Assigned Services > DHCP > DHCP Enterprise Configuration.
  2. In the left menu, expand the Configuration Mode section, and click Switch to Advanced View.
  3. Click Lock.
  4. In the left menu, select Operational Setup IPv4 or 6.
  5. In the Address Pool Configuration window, enable DHCP.
    advanced_dhcp.png
  6. Enable Use Advanced Pool Configuration. This disables the Subnets section and allows configuration of address pools.
  7. Enter the name of the DHCP server in the DHCP Server Identifier textbox. This name allows clients to distinguish between different DHCP servers.

  8. Select the UDP Listen Port on which the DHCP server listens for DHCP requests. By default, the server listens on port 67.

  9. Click Send Changes and Activate.

You can now configure advanced DHCP settings such as subnets and address pools, templates, classes, and known clients.