We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Managed Workplace

About Installation

  • Last updated on

Review all documentation prior to performing an installation so that you are familiar with the procedures involved.

Access to Software

Barracuda Managed Workplace installation packages are available on the Partner Portal. You will be provided with a login and password so that you can download the installers.

The packages available for download include the following:

Service Center installer A download that does not contain any redistributables. If a component is missing from the computer you are installing to, you can use a download link to fetch it.

Onsite Manager installer Does not contain any redistributables, but will check for any missing components and will provide a link to download the product on Microsoft's website.

Note: The Onsite Manager installer can also be downloaded from within Service Center, in the Site Management page.

Onsite Manager appliance installer Used with Microsoft’s System Preparation utility to create an image to clone Onsite Managers. It is otherwise identical to the Onsite Manager installer.

Installing Service Center

Before proceeding, ensure that:

  • the server meets Service Center system requirements for the expected monitoring load.
  • the user account performing the installation must have Domain or Local Administration privileges, as applicable.
  • ensure the FQDN has been registered with the DNS.
  • all Microsoft installation source files are available.
  • all Barracuda Managed Workplace installation source files are available locally.
  • you have your VAR code so you can complete the registration. Your Senior Account Manager provides this, and it is the same as your account number.

The Hosted Service Center installer creates the Application Servers that receive incoming information from solution providers' customers' sites, and also provide the interface for users and PSA applications to interact with the system.

As the resource demand increases over time as VARs are added to the environment you will want to install multiple Application Servers.

Reboot After Install

Barracuda Managed Workplace 10 SP3 and higher requires Microsoft .NET 4.6.0, which is included in the installer unless .NET 4.6.0 or higher is already installed on the target machine. For example, Microsoft Windows 10 includes .NET 4.6.0 or higher, so does not require an additional installation.

.NET 4.6.0 requires a reboot after installation on certain Operating Systems. The following table shows which Operating Systems will reboot after the install.

Operating SystemReboot
Windows 10No
Windows 8.1Yes
Windows 8Yes
Windows 7 SP 1Yes
Windows Vista 7 SP2Yes
Windows Server 2016No
Windows Server 2012 R2Yes
Windows Server 2012Yes
Windows Server 2008 R2 SP1Yes
Virtual Directories and New Websites

Barracuda Managed Workplace creates three URLs for deployment. You can choose to create virtual directories or new websites.

The install creates the path the following way, based on the FQDN that you provide:

  • Virtual directories – The component identifier is added to the end of the site path. See the Example 1 column in the table below.
  • Separate sites – The component identifier is added to the beginning of the site URL. See the Example 2 column in the table below. Important: Microsoft Windows Server 2008 SP2 is no longer a supported operating system.
Component

Example 1

Virtual Directories

Example 2

New Sites

Public Service Center URL

http://www.mycompany.com/SChttp://sc.mycompany.com
Public SCMessaging URLhttp://www.mycompany.com/SCMessaging/ScWebservices.asmxhttp://SCMessaging.mycompany.com/ScWebservices.asmx

Public Update Service URL

http://www.mycompany.com/MWUS

http://MWUS.mycompany.com

Important: Microsoft Windows Server 2008 SP2 is no longer a supported operating system.

  1. Double-click SetupSC.exe to launch the Service Center installer.
  2. Click Verify Required Components to confirm software requirements. Install any missing components by clicking the links presented, if any.
  3. Under the Options section, select the Install Service Center check box.
  4. Click Install Service Center.
  5. Click Next.
    If any required Windows services are not running, you will be prompted to start them at this point. Also, if you are presented with the option, click Configure to update IIS and ASP.NET to work with Barracuda Managed Workplace.
  6. Indicate where you want to create the Service Center databases by selecting Local machine or Remote machine. Click Next.
    • If you select Remote machine, the SQL Server Login dialog box opens. Choose the target SQL Server from the list. Enter the SQL login and password and click OK. The account must have the sysadmin server role. Click Next.
    Note: It is not recommended to use the built-in "sa" account for SQL Server. Instead, create a new account with the sysadmin role and ensure that "Enforce password expiration" is not selected.
    • If you select Local machine, choose the SQL instance to which the databases will be created. Click Next.
  7. Indicate where you want to create the Service Center databases by selecting Local machine or Remote machine. Click Next.
  8. The SQL Server Login dialog box opens. Choose the target SQL server from the list or manually type the server name or IP address. Enter the SQL authentication login and password. Click Next.
  9. Click Browse to review the installation path and, if required, select a different location. Click Next.
  10. Choose whether a proxy will be used.
    If using a proxy server, do the following:
    1. Enter the Address, Port, Username and Password.
    2. Define the authentication type by selecting either Basic, Digest or Negotiate.
    3. Click Next.
  11. Indicate how you want the Service Center websites to be created by choosing either Virtual Directory or New Website. Click Next.
    Note: If the computer is a Domain Controller, the only option you will have is to create virtual directories.
    • If using a virtual directory, select the parent website and enter Virtual Directory Name. Click Next.
    • If using a new website, enter the URL for Service Center. A corresponding DNS entry is required to view the site. Click Next.
    Note: Ensure the FQDN has been registered with the DNS.
    The Public Service Center Communication Settings dialog box opens.
  12. Enter the following information:
    1. Public facing Service Center URL, which is the URL for Service Center, that must also be accessible from the Internet in order for Device Managers to obtain configuration information.
    2. Public SCMessaging URL, which is the URL used by the Onsite Managers, Device Managers and other components of Barracuda Managed Workplace to report and send data to Service Center.
    3. Public Update Service URL, which is the URL used by the Service Center application and by device managers under patch management to update Microsoft and Windows applications on devices.
    Note: If you use an https schema, before starting Service Center, use IIS to select a certificate for the website.
    Note: Self-hosted partners with https enabled may require an additional certificate if a wildcard certificate is not being used.
  13. Write the URL down because you will need it later when you install the Onsite Manager. Click Next.
  14. Click Install.
  15. Once the wizard completes, click Continue to begin the Report Configuration Wizard.
  16. Once the wizard completes, click Continue to run Reporting Services Configuration utility.
  17. From the Barracuda Managed Workplace Service Center - Reporting Service Configuration, select Remote Machine and enter the host name or IP address of the SQL Server in the Machine Name box.
    Under User Credentials with Access to Server, select either Local Administrator Account or Domain User Account (specifying the User Name, including Domain, and Password) and click OK. Whichever account is selected, it must have access rights to create a local user on the remote machine.
  18. Click OK when a dialog box shows your choices, and again when you are advised that the configuration succeeded.
  19. Indicate where Microsoft SQL Reporting Services is installed by selecting either Local Machine or Remote Machine.
    • If you selected Local Machine, click OK. Select the check box for the Reporting Services Instance and click OK.
    • If you selected Remote Machine, select the machine where the SQL Reporting Services is installed. Enter a User Name and Password for a Local or Domain Administrator. If you are using a Domain Administrator, include the Domain in the User Name (such as, Domain\User). Click OK. Select the check box for the Reporting Services Instance and click OK.
    The Select a Report Server dialog box opens.
  20. Select the check box for an SQL instance and click OK.
  21. Click OK when advised that Report Server configuration succeeded.
  22. The Register Service Center dialog box opens. Enter identifying information in the Company Information and Contact Information sections.
  23. Type your VAR Code and then click Register.
  24. Type your Installation Key into the Key box and then click Register.
  25. Click OK when notified database creation may take several minutes.
  26. Click OK to complete the installation when advised that Service Center was successfully registered.
  27. Click Exit to close the installer.Start Service Center and log in with the default account Admin (no password required).

Adding Application Servers

When starting out hosting Barracuda Managed Workplace, it is customary to begin with two application servers at a minimum. This allows you to balance the load between the servers as you on-board more VARs with Service Centers.

Adding application servers after the first one is installed is very simple. Perform the install following the exact same procedure you followed for the first one. Then, make sure the IP address of the new application server is added to the load-balancer.

Important: The MW Remote Desktop service, which manages legacy remote control connections, must only be running on a single application server. On all others, disable the service. If you originally installed Barracuda Managed

Workplace 2011 or later, you can safely ignore this requirement as the service will never be accessed.

Important: Each application server must be able to contact each other application server locally in order for mobile device management to function correctly in environments with multiple application servers.

Firewall rules required for multiple application servers

The MW installer doesn’t create the firewall rules that are required for multiple application server configurations. As a result, the creation of a new VAR may fail when installed on multiple application servers with certain firewall rules in place.

To ensure successful VAR creation, add the following rules to Windows Firewall on each application server you want to use:

  • %SystemRoot%\System32\inetsrv\w3wp.exe
  • %ProgramFiles% (x86)\Level Platforms\Service Center\Bin\SCMonitor.exe
  • %ProgramFiles% (x86)\Level Platforms\Service Center\Bin\SCWorker.exe
To Add Rules to Windows Firewall
  1. In Windows, click Start > Control Panel.
  2. Click Windows Firewall.
  3. Click Advanced Settings.
  4. Click Inbound Rules.
  5. Click New Rule.
  6. Click Program.
  7. Click the This Program Path button and type the following:
    • %SystemRoot%\System32\inetsrv\w3wp.exe
  8. Click Next.
  9. In the Action step, click Next.
  10. In the Profile step, click Next.
  11. In the Name step, type a name for the rule, then click Finish.
  12. Repeat steps 3 to 13 twice, typing the following paths in step 7:
    • %ProgramFiles% (x86)\Level Platforms\Service Center\Bin\SCMonitor.exe
    • %ProgramFiles% (x86)\Level Platforms\Service Center\Bin\SCWorker.exe
  13. Repeat this procedure for each application server you want to use in your installation.
Defining an Application Server for Mobile Device Management

The mobile device management service is controlled by a single application server, even when multiple application servers are available. A single web service connection is accepted from all Android and Blackberry mobile devices enrolled for Service Centers hosted by the system, as are transient connections from the Service Centers when users send immediate commands to these devices.

  1. Using SQL Management Studio, connect to the Service Center database server.
  2. Open the SCMaster database and open the Configuration table. Enter the IP address of the application server to host mobile device management in the TunnelServerHost record. This IP address must be accessible to all of the application servers in the environment.
  3. On the selected application server, open \Level Platforms\Service Center\SCMdmWindowsServices\TunnelServer\TunnelServer.exe.config and edit <Add Port=”7778” Address=”127.0.0.1”> to read <Add Port=”7778” Address=”0.0.0.0”>.
  4. Confirm that all application servers have access to port 7778 on the selected application server.
  5. Using the Windows Service Control Manager, locate the TunnelService service. Right-click it and choose Restart.
  6. On each application server, restart the MWPool application pool from within IIS.

 

Last updated on