How to Back Up Archives

Step 1. Enable SMB Access to the Barracuda Message Archiver's Data Partition

Use the following steps to enable backup of your stored content via SMB:

1. Log into the Barracuda Message Archiver, and go to the Advanced > Backups page.
2. In the Backup of Archives section, set Back Up Archives via SMB to Yes to allow access to the Barracuda Message Archiver message store as an SMB share.
3. Enter the Workgroup in which the Barracuda Message Archiver should appear.
4. Enter the Password for the username smb used to connect to the SMB share:
    
5. Click Save.

Step 2. Set Up Raw Email Data and Metadata Snapshot Backup

1. Log into your Windows Network or Backup System such as Barracuda Backup.
2. Connect to the Barracuda Message Archiver data partition by accessing \\ host \BMA-SMB-#.
3. Back up the following files and directories:
   • Raw Email data:
     
     • *.zip (1GB-sized message archives)
     • <nnn>/ (directory containing recently received emails, not yet merged into a . zip)

   • Snapshots of Metadata

     The following snapshots are performed nightly. In the event that data restoration is necessary, typically only the raw emails (from .zip files) arrived in the last day must be reprocessed.

     • FolderSync (snapshot of foldersync data) 
     • index (snapshot of archives of index metadata)
     • index_backup (snapshot of the entire index)
     • ldap_cache (snapshot of ldap group information)
     • log (snapshot of important system information)
     • postgres_backup (snapshot of system databases)

Use the following steps to add the mirror share to your configured network share:

1. Log into the Barracuda Message Archiver as the administrator, and go to the Advanced > Storage Manager page.

2. If you have a CIFS/Windows share already set up, complete the following sub-steps, otherwise go to step 3:
   1. In the Default (Group) table, select the share from the drop-down menu.
   2. Click Add Mirror.
3. If you do not have a CIFS/Windows share already set up, complete the following steps:
   1. In the CIFS/Windows Share section at the bottom of the page, enter the share details, and click Add.
   2. In the Group table, select the share you want to use to back up the data from in the drop-down menu, and click Add Mirror.

Use the following steps to back up the Barracuda Message Archiver using Barracuda Backup:

1. Log into Barracuda Backup as the Administrator, and go to the Backup > Sources page.
2. Click Add a Computer. In the Add a Computer page, enter a Computer description and enter the IP address or fully qualified domain name (FQDN) in the Computer Name field.
3. From the Computer Type drop-down menu, select Microsoft Windows.
4. Set Enable File Share Backups. In the Username field, type smb and enter the password you set up on the Advanced > Backups page in the Barracuda Message Archiver web interface:
    
5. Click Test Credentials to verify access to the file share.
6. Click Save at the top of the page.
7. In the Add Data Source page, from the Data Type drop-down menu, select File Share - CIFS.
8. Verify Enable Backups is set to On .
9. In the File Share Information section, enter BMA-SMB as the Share Name. 

10. Click Test Share. In the Folder Selection section, specify which folders you want to back up.

    Barracuda Networks recommends selecting all folders for backup. See Option 1, Step 2. Set Up Raw Email Data and Metadata Snapshot Backup for a description of the data to be backed up.

    
    

11. To replicate to the cloud, turn on Replicate to Barracuda Cloud Storage.
12. Select the backup schedule for the SMB share.
13. Click Save to save your configuration and add the data source.