The Barracuda SSL VPN uses two administrative interfaces: the appliance web interface and the SSL VPN web interface.
Appliance web interface
You can access the appliance web interface at either of the following IP addresses:
https://<configured IP address for the Barracuda SSL VPN>:8443
or http://<configured IP address for the Barracuda SSL VPN>:8000
This interface listens on port 8000 (HTTP) or 8443 (HTTPS). Log into this interface to configure all non-user facing options including network configuration, clustering, firmware upgrades, and Energize Updates. The default login credentials for the appliance web interface are:
- User:
admin
- Password: enter the serial number of your Barracuda SSL VPN.
SSL VPN web interface
You can access the SSL VPN web interface at:
https://<configured IP address for the Barracuda SSL VPN>
This interface listens on port 443 (HTTPS). Log into this interface to configure all settings for the SSL VPN service. It also includes all user facing settings and functionalities. The SSL VPN web interface can be used in two modes. You can switch between both modes by clicking the link in the upper right of the web interface:
- Manage System – Manage VPN access to the system.
- Manage Account – Manage the account settings.
The default login credentials for the SSL VPN web interface are:
- User:
ssladmin
- Password: enter the serial number of your Barracuda SSL VPN.