It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda NextGen Firewall X
Overview Documentation Materials

This Product is End-of-Life and End-Of-Support

End-Of-Life and End-Of-Support on December 1st, 2020: All Barracuda Firewall X-Series sales will cease; neither new sales nor any renewals will be available. If you currently hold a maintenance and support contract, you will continue to receive our award-winning support and services until your contract expires. Please see the End-Of-Life definition as described in the End of Support and End of Life Information.

Wi-Fi AP Authentication Ruckus Wireless Configuration

  • Last updated on

To authenticate users connected to Ruckus access points, you must stream the syslog containing the authentication data to the Barracuda NextGen Firewall X-Series.

Reference Devices/Versions: 

  • ZoneDirector 1100 (ZD1106) Version 9.10.0.0 build 21

  • ZoneFlex zf7321-u Access Point):

Step 1. Enable Syslog Streaming on the Ruckus Wireless AP

Enable Client Association in the debug log settings.

  1. Go to Administer > Diagnostics.
  2. In the Debug Logs section, enable Client Association.
  3. Click Apply. 
    ruckus_01.png

Step 2. Enable Syslog Streaming on the Ruckus Wireless AP

  1. Go to Configure > System Log Settings.
  2. Enable the Remote Syslog.  
  3. Enter the IP address of the X-Series Firewall. 
    ruckus_02.png
  4. Click Apply.

You can now configure Wi-Fi Access Point authentication on the X-Series Firewall. For more information, see How to Configure Wi-Fi Access Point Authentication.