It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda NextGen Firewall X

This Product is End-of-Life and End-Of-Support

End-Of-Life and End-Of-Support on December 1st, 2020: All Barracuda Firewall X-Series sales will cease; neither new sales nor any renewals will be available. If you currently hold a maintenance and support contract, you will continue to receive our award-winning support and services until your contract expires. Please see the End-Of-Life definition as described in the End of Support and End of Life Information.

Wi-Fi AP Authentication Aruba Configuration

  • Last updated on

To authenticate users connected to Aruba access points, you must stream the syslog containing the authentication data to the Barracuda NextGen Firewall X-Series.

Reference Devices/Versions: 

  • Aruba Controller 651 Version 6.4.1.0
  • Aruba AP 105   

Enable Syslog Streaming on the Aruba AP

  1. Log into the Aruba Mobility Controller.
  2. Click on the Configuration tab.
  3. In the MANAGEMENT section of the left menu, click on Logging
  4.  In the Logging Servers section, click New:
    • IP Address – Enter the management IP address of the X-Series Firewall.
    • Category – Select user.
    • Logging Facility – Select the logging facility to be able to differentiate between multiple Aruba APs.
    • Severity – Select notifications.
  5. Click Add.
  6. Click Apply.
    aruba_01.png
  7. Click on the Levels tab.
  8. Set the Logging Levels in the User logs section to notifications.
    aruba_02.png
  9. Click Apply.

You can now configure Wi-Fi Access Point authentication on the X-Series Firewall. For more information, see How to Configure Wi-Fi Access Point Authentication.