We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda NextGen Firewall X


This Product is Going End-of-Life and End-Of-Support

End-Of-Sales: As of December 1st, 2018, all new sales for Barracuda NextGen Firewall X Series products have ceased. Only renewals of software and hardware subscriptions for a maximum of one year are available for a limited time up to an expiration date of 30th November 2020.

End-Of-Life and End-Of-Support on December 1st 2020: All Barracuda Firewall X-Series sales will cease; neither new sales nor any renewals will be available. If you currently hold a maintenance and support contract, you will continue to receive our award-winning support and services until your contract expires, or until Dec 1st, 2020, whichever occurs first. Please see the End-Of-Life definition as described in the End of Support and End of Life Information.

How to Configure a Static Route

  • Last updated on

Create a static route to specify a gateway for an unassociated network so that the return traffic can take the correct path. In general, you must add a static route when you want to reach networks that are not directly attached to the Barracuda NextGen X-Series Firewall or the default gateway.

Add a Static Route

  1. Go to NETWORK > Routing.
  2. In the Target Network field of the Static Route Configuration section, enter the IP address and netmask of the target network in CIDR format, e.g.,
  3. In the Gateway field, enter the IP address of the next hop or gateway. This gateway must be reachable by a direct route.
  4. If you must specify the source IP address used with this gateway, enter it in the Source Address field.
  5. From the Classification drop-down menu, select the relevant network.
  6. Specify Metric and Maximum Transmission Unit (MTU) for the route, if required.

    If more than one route to the same target network exists, you must assign a unique metric value to each route. The lowest metric (or preference number) specifies the preferred route. If the gateway becomes unreachable, the route with the next lowest metric will be used.

  7. Click Add
  8. At the top of the page, click on the warning message to execute the new network configuration.

The static route is now displayed in the NETWORK ROUTES table.

(optional) Add a Reachable IP to the Static Route

After your have successfully added a static route, you have the option to assign an IP address that can be reached via this route. This is indicated by the Options button.

  1. Click Options.
  2. The window for configuring Static Route Configuration Options is displayed.
  3. Enter the IP address that you want to reach via the static route.
  4. Click + to add the IP address to the setting.
  5. Click Save to save or Cancel to discard the changes.
Last updated on