It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda NextGen Firewall X
Overview Documentation Materials

This Product is End-of-Life and End-Of-Support

End-Of-Life and End-Of-Support on December 1st, 2020: All Barracuda Firewall X-Series sales will cease; neither new sales nor any renewals will be available. If you currently hold a maintenance and support contract, you will continue to receive our award-winning support and services until your contract expires. Please see the End-Of-Life definition as described in the End of Support and End of Life Information.

How to Configure Static Network Interfaces

  • Last updated on

Follow the instructions in this article to configure a static network interface. You can add a subnet to a free physical or virtual interface.

static_interface_fw.png

Configure a static network interface

  1. Go to the NETWORK > IP Configuration page.
  2. In the Static Interface Configuration section, click Add Static Network Interface.
  3. In the Add Static Network Interface window, select an interface from the list and enter a Name.
  4. Enter IP address and netmask of the interface and configure the settings as follows:
    • From the Classification list, you can select the following options to specify if the network is added to a network object:
      • Unclassified – The network is not added to any network objects.
      • Trusted – The network is added to the Trusted LAN network object.
      • DMZ – The network is added to the DMZ Networks network object.
      • WAN – The network is added to the Internet network object.
    • If you do not enter a Gateway, the default gateway (0.0.0.0) is used.
  5. Click Save.
  6. At the top of the page, click on the warning message to execute the new network configuration.