We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda NextGen Firewall X

This Firmware Version Is End-Of-Support

As of December 1st, 2018, all new sales for Barracuda NextGen Firewall X Series products have ceased. Only renewals of software and hardware subscriptions for a maximum of one year are available for a limited time. December 1st 2019: All Barracuda Firewall X-Series sales will cease; neither new sales nor any renewals will be available. If you currently hold a maintenance and support contract, you will continue to receive our award-winning support and services until your contract expires, or until the End of Live definition as described in the End of Support and End of Life Information.

Wi-Fi AP Authentication Ruckus Wireless Configuration

  • Last updated on

To authenticate users connected to Ruckus access points, you must stream the syslog containing the authentication data to the Barracuda NextGen Firewall X-Series.

Reference Devices/Versions: 

  • ZoneDirector 1100 (ZD1106) Version 9.10.0.0 build 21

  • ZoneFlex zf7321-u Access Point):

Step 1. Enable Syslog Streaming on the Ruckus Wireless AP

Enable Client Association in the debug log settings.

  1. Go to Administer > Diagnostics.
  2. In the Debug Logs section, enable Client Association.
  3. Click Apply
    ruckus_01.png

Step 2. Enable Syslog Streaming on the Ruckus Wireless AP

  1. Go to Configure > System Log Settings.
  2. Enable the Remote Syslog 
  3. Enter the IP address of the X-Series Firewall. 
    ruckus_02.png
  4. Click Apply.

You can now configure Wi-Fi Access Point authentication on the X-Series Firewall. For more information, see How to Configure Wi-Fi Access Point Authentication.

Last updated on