We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda NextGen Firewall X

This Firmware Version Is End-Of-Support

As of December 1st, 2018, all new sales for Barracuda NextGen Firewall X Series products have ceased. Only renewals of software and hardware subscriptions for a maximum of one year are available for a limited time. December 1st 2019: All Barracuda Firewall X-Series sales will cease; neither new sales nor any renewals will be available. If you currently hold a maintenance and support contract, you will continue to receive our award-winning support and services until your contract expires, or until the End of Live definition as described in the End of Support and End of Life Information.

Example - Configuring a Static WAN Connection

  • Last updated on

This article provides example settings to configure an interface for an ISP that statically assigns an IP address for a WAN uplink. For instructions on how to configure a static network interface, see How to Configure Static Network Interfaces.

The static WAN interface and ISP gateway for this example are shown in the following figure:

static_interface_wan.png

The interface must be configured on port p4 with an IP address of 69.122.23.58 and a netmask of 255.255.255.0 (or /24). The default gateway of the ISP is 69.122.23.254.

Configure the static network interface with the following settings:

SettingValue
Network InterfaceSelect p4.
IP AddressEnter 69.122.23.58.
NetmaskEnter 255.255.255.0.
ClassificationClick WAN.
GatewayEnter 69.122.23.254.
Last updated on