Scope:
This solution replies to:
- NG Firewall firmware versions 4.2.x,5.0.x, 5.2.x
- netfence firmware versions 4.2.x
- NG Firewall firmware versions 4.2.x,5.0.x, 5.2.x
- netfence firmware versions 4.2.x
Symptoms:
Messages output is configured to be sent to the serial console. For maintenance use, you temporarily want it to be displayed on the monitor.
Solution:
Take following steps to receive the output on the screen:
1. Press the TAB key at the boot menu prompt.
2. Select the kernel phion.
3. At the command prompt type in:
phion console=tty0
4. As password type in 'ph10n':
ph10n
Link to This Page:
https://campus.barracuda.com/solution/50160000000IKYgAAO