It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda NextGen Firewall X

Manual file system check when system stops during the boot process

  • Type: Knowledgebase
  • Date changed: one year ago
Solution #00005169
 
Scope:
This solution replies to:
- NG Firewall firmware versions 4.2.x, 5.0.x, 5.2.x
- netfence firmware versions 4.2.x

 
Symptoms:

The system stops during boot process. A message is displayed saying that a manual file system check is required.


 

Solution:

The file system on one of the partitions is corrupt. The netfence system is not able to correct the error automatically. The corruption is caused by a system crash or shut down while data is still written.

 

1. Enter the root password at the command prompt


 

2. Perform a manual file system check by entering the following commands:

 

    For IDE HDD systems:


    ext2 file system:

  /sbin/fsck.ext2 -y /dev/hda1
  /sbin/fsck.ext2 -y /dev/hda5
  /sbin/fsck.ext2 -y /dev/hda6

 

    ext3 file system:

  /sbin/fsck.ext3 -y /dev/hda1
  /sbin/fsck.ext3 -y /dev/hda5
  /sbin/fsck.ext3 -y /dev/hda6

 

 

    For SCSI HDD systems:


    ext2 file system:

  /sbin/fsck.ext2 -y /dev/sda1
  /sbin/fsck.ext2 -y /dev/sda5
  /sbin/fsck.ext2 -y /dev/sda6

 

    ext3 file system:

  /sbin/fsck.ext3 -y /dev/sda1
  /sbin/fsck.ext3 -y /dev/sda5
  /sbin/fsck.ext3 -y /dev/sda6


3. Reboot the system by pressing Ctrl-D.

 

 

Link to This Page:
https://campus.barracuda.com/solution/50160000000IKZOAA4