Scope:
This solution replies to:
- NG Firewall firmware versions 4.2.x, 5.0.x, 5.2.x
- netfence firmware versions 4.2.x
- NG Firewall firmware versions 4.2.x, 5.0.x, 5.2.x
- netfence firmware versions 4.2.x
Symptoms:
This message is continuously reported at the command-line prompt:
INIT: Id "s0" respawning too fast: disabled for 5 minutes
INIT: Id "s0" respawning too fast: disabled for 5 minutes
INIT: Id "s0" respawning too fast: disabled for 5 minutesWhat does it mean?
Solution:
This message occurs, when the serial console is disabled in the BIOS and enabled in the configuration ("Config" > "Box" > "Administrative Settings" > "System Access") or the serial console is disabled in the configuration ("Config" > "Box" > "Administrative Settings" > "System Access") and enabled in the BIOS.
Check the BIOS and the configuration ("Config" > "Box" > "Administrative Settings" > "System Access") for serial console settings and set it on both sites similar.
Link to This Page:
https://campus.barracuda.com/solution/50160000000IKZyAAO