This article refers to Barracuda Phone System and Yealink phone models T-22, T-26, T-28, T-32, T-38, and T-46.
Provision the Phone
Use the following steps to configure the phone for provisioning:
- On the phone, press the Menu button, and then select Settings > Advanced Settings. (Menu > Advanced on T46.)
- Use the key pad to enter the default password admin.
- Use the arrow keys to scroll down to Auto Provision, and then press Enter.
- Enter 'http://1.2.3.4/provision/' where 1.2.3.4 is the IP of the Barracuda Phone System as the URL using the * key to enter the dots in the IP address.
- Press Save, and press OK when the phone prompts you to provision now.
- Allow the phone to reboot. This may take several minutes.
- Log in to the Barracuda Phone System web interface, and go to Extensions > Unassigned Phones.
- The phone will have a temporary extension number and will be named "Unassigned Yealink <model> (MAC addr)". It can now be assigned to a user.
- After a phone is provisioned by the Barracuda Phone System, its password changes to 2832.
Reset Factory Defaults
If the phone fails to provision, reset its configuration with the following steps:
- On the phone, press the Menu button, and then select Settings > Advanced Settings. (Menu > Advanced on T46.)
- Use the keypad to enter the default password admin.
- Dial the following number sequence: 2-3-6-444-66
- Press Confirm.
- Use the Arrow keys to scroll down to Reset to Factory, and then press Enter.
- Press OK, and allow the phone to reset. This may take several minutes.
- Allow the phone to reboot. This may take a few minutes.
You can now provision the phone again.