We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Phone System

How do I manually configure my Linksys-Cisco Pap2T IP phone adapter with my Barracuda Phone System?

  • Type: Knowledgebase
  • Date changed: 2 years ago

Solution #00004862

 

Scope:

This solution applies to all Linksys and Cisco PAP2T devices connecting to CBarracuda Phone Systems.

 

Answer:

Assuming that the Linksys and Cisco PAP2T device is already connected to the network and a phone is connected to the unit:

 

From the Barracuda Phone System

For Firmware Versions 2.5.005 and earlier:
  1. Navigate to Extensions > People, and select the desired user.
  2. Scroll down to the section of the properties page labeled Phones and click Add a Phone.
  3. Select  Generic SIP Device and click the button labeled Add Phone.
  4. Click on the new Phone on the properties and select Phone Information.
  5. Click on the extension number on the left side of the window.
For Firmware Versions 2.6 and Later:

  1. Navigate to Extensions > People, and select the desired user.
  2. Scroll down to the section of the properties page labeled Phones and click Add a Phone.
  3. Select  Generic SIP Device and click the button labeled Add Phone.
  4. Click on the new Phone on the properties and select Reg Info from the section labeled Utilities for the Desired Line.

 

Note: For ease of troubleshooting, it is best to make sure that the Softphone has its own extension.

 

From the Phone:

Pick up the handset and dial **** then 110#. The adapter will announce the IP address for you.

 

From the Computer:

Open a web browser, and navigate to the IP Address provided by the Adapter. Click on Admin Login in the top right then Switch to Advanced View at the top center of the page. Click on Provisioning in the top menu and make sure that Provision Enable: is set to NO. Click on Line 1 in the top menu. Make these changes to this page:

 

Proxy – Should be either the LAN Domain or WAN Domain provided by the Barracuda Phone System, including the port

Display Name - should be your Extension number

User ID - should be you Extension Number

Authorization ID – Should be the Auth Username provided by the Barracuda Phone System

Password – Should be the Password provided by the Barracuda Phone System

 

Note: Make sure that you leave the SIP Port: setting at 5060.

 

Click Save, and then reboot to complete setup.

 

Link to this page:

https://campus.barracuda.com/solution/50160000000IGfkAAG