It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Phone System

How do I manually configure my PAP2T to provision from my Barracuda Phone System?

  • Type: Knowledgebase
  • Date changed: 2 years ago

Solution #00005670



This solution applies to all Linksys and Cisco PAP2T devices connecting to Barracuda Phone Systems.



Assuming that the Linksys and Cisco PAP2T device is already connected to the network and a phone is connected to the unit:


From the Phone:

Pick up the handset and dial **** then 110#. The adapter will announce the IP address for you.


From the Computer:

Open a web browser, and navigate to the IP address for the phone. Click on the Admin link on the top-right (the default login is admin with no password) , then click Advanced in the top right corner of the page. Under the Provisioning tab on the top, make sure Provision Enable is set to Yes, Enter the value http://<IP address of the BPS>/provision/cisco/$PN/$MA.xml in the field named Profile Rule, select HTTP for Transport Protocol, and then click the button labeled Submit All Changes. The PAP2T should now reboot and provision via the Barracuda Phone System.


Alternative Cisco SPA Resync Option:
An alternative method of setting the Cisco SPA8800 to provision from the Barracuda Phone System is to use the Cisco SPA resync URL. To use this option, copy and paste the link below into a web browser, replacing with the IP address of the SPA8800 and with the IP address of the BPS. The PAP2T should automatically reboot and provision from the Barracuda Phone System.$PN/$MA.xml

Please refer to the following solutions for instructions on assigning and configuring your phone:

Solution# 6046 - How do I Configure Provisioned Phones on the Barracuda Phone System on Firmware and Earlier?

Solution# 6047 - How do I Configure Provisioned Phones on the Barracuda Phone System on Firmware 2.6 and Later?


Link to this page: