It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda SSL VPN

Attention

This Product Is Going End-Of-Life and End-Of-Support

End-OF-Sales: As of 1st March 2019, all new sales for the Barracuda SSL VPN product have ceaved. Only renewals of software and hardware subscriptions are available for a limited time up to an expiration date of 30th November 2020.

End-OF-Life and End-Of-Support on 1st December 2020: All Barracuda SSL VPN sales will cease; neither new sales nor any renewals will be available. If you currently hold a maintenance and support contract, you will continue to receive our award-winning support and services until your contract expires, or until Dec 1st, 2020, whichever occurs first.

Administrative Interfaces

  • Last updated on

The Barracuda SSL VPN uses two administrative interfaces: the appliance web interface and the SSL VPN web interface.

Appliance web interface

You can access the appliance web interface at either of the following IP addresses:

https://<configured IP address for the Barracuda SSL VPN>:8443 or http://<configured IP address for the Barracuda SSL VPN>:8000

This interface listens on port 8000 (HTTP) or 8443 (HTTPS). Log into this interface to configure all non-user facing options including network configuration, clustering, firmware upgrades, and Energize Updates. The default login credentials for the appliance web interface are:

  • Useradmin
  • Password: enter the serial number of your Barracuda SSL VPN.

The default password is intended for initial access only. You must change it once you have configured your Barracuda SSL VPN. For more information, see Step 5 in Barracuda SSL VPN Vx Quick Start Guide.

SSL VPN web interface

You can access the SSL VPN web interface at:

https://<configured IP address for the Barracuda SSL VPN>

This interface listens on port 443 (HTTPS). Log into this interface to configure all settings for the SSL VPN service. It also includes all user facing settings and functionalities. The SSL VPN web interface can be used in two modes. You can switch between both modes by clicking the link in the upper right of the web interface: 

  • Manage System – Manage VPN access to the system.
  • Manage Account – Manage the account settings.

The default login credentials for the SSL VPN web interface are:

  • Userssladmin
  • Password: enter the serial number of your Barracuda SSL VPN.
Last updated on