We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Web Security Service

Enforcement Mode, IP Configuration and Static Routes

  • Last updated on

Specify configuration settings by selecting the desired Barracuda Web Security Service Connector on the Gateway tab and clicking the IP Configuration tab. You can configure the following settings on this page:

If you are not already in the Barracuda Web Security Service Manager interface, click Barracuda Web Security Service at the top of your Barracuda Cloud Control login screen. In the Barracuda Web Security Service Manager, click the CONFIGURATION tab.

Enforcement Mode - Where Policies Are Applied to Web Traffic

To configure the Enforcement Mode for a Barracuda Web Security Service Connector:

Set Enable Local Enforcement Mode to one of the following:

  • Local Enforcement - the Barracuda Web Security Service Connector performs policy enforcement; only log information is sent to the Barracuda Web Security Service Manager for reporting purposes.
  • Service Enforcement (default setting) - the Barracuda Web Security Service Connector proxies web traffic to the Barracuda Web Security Service for policy enforcement.

If you have set the Enforcement Mode to Service Enforcement Mode, you can turn on SSL Scanning by setting Enable SSL Scanning to Yes.

SSL Scanning is only available with Barracuda Web Security Service Connector in Service Enforcement Mode.

Save Changes and when prompted to sync the Barracuda Web Security Service Connector, click Sync.

IP Configuration

View or change the IP Configuration settings in the IP Configuration section.

The following fields are visible:

  • IP Address
  • Subnet Mask
  • Default Network Gateway
  • Service Host
  • Authenticaiton Key

You can enter or edit entries in the following fields:

  • Primary DNS Server
  • Secondary DNS Server
  • Default Host Name
  • Default Domain
  • Redirect IP: If the Default value conflicts with an existing LAN IP, you need to change the Redirect IP.
  • Enable WCCP: Select this option to enable Barracuda WSG to accept traffic from WCCP enabled network devices. Fill in the fields on the Add/Edit WCCP page and click Submit.

Save Changes and when prompted to sync the Barracuda Web Security Service Connector, click Sync.

Static Routes

View, add, or edit Static Routes in the Static Routes section:

  • To edit a static route, select the IP Address of the existing route from the list. 
  • To add a static route, click Add New Route and fill in the following fields:
    IP/Network Address
    Netmask
    Network Gateway Address: The Network Gateway Address for this static route.

Save Changes and when prompted to sync the Barracuda Web Security Service Connector, click Sync.

Last updated on