It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda XDR
Overview Documentation Materials

Integrating Barracuda IDS Collector

  • Last updated on

This setup is for the XDR Collector only. If you are using a physical or virtual sensor, refer to Integrating Barracuda IDS.

To set up a Barracuda IDS Collector, do the following:

  • Enable Barracuda IDS Collector
  • Install the XDR Collector

Enable Barracuda IDS Collector

  1. In Barracuda XDR Dashboard, navigate to  Administration >  Integrations.
  2. On the Barracuda IDS Collector card, click Setup.
    2024-02-29_11-17-14.png
  3. Select the Enabled check box.
    2024-02-29_11-17-52.png
  4. Click Save.

Install the XDR Collector

When collecting logs from one or more applications, always set up the XDR Collector on a dedicated host server. Don't use an existing server because the amount of data produced by logs can impact critical infrastructure.


Previous Article Next Article