F600 Revision C

Last updated on 2021-01-27 03:53:00

F600 Rev. C Model C10

F600.C10_FrontRack.png

F600.10.back.png

F600 Rev. C Model C20

F600.C10_FrontRack.png

F600.20.back.png

F600 Rev. C Model F10

F600.F10_FrontRack.png

F600.10.back.png

F600 Rev. C Model F20

F600.F10_FrontRack.png

F600.20.back.png

F600 Rev. C Model E20

F600.E20_FrontRack.png

F600.20.back.png

F600 C Standard Model C10/C20 Port Configuration

Port Label	OS Notation	Speed/Type	Management Port
1	port1	10/100/1000 MBit RJ45	X
2	port2	10/100/1000 MBit RJ45
3	port3	10/100/1000 MBit RJ45
4	port4	10/100/1000 MBit RJ45
5	port5	10/100/1000 MBit RJ45
6	port6	10/100/1000 MBit RJ45
7	port7	10/100/1000 MBit RJ45
8	port8	10/100/1000 MBit RJ45
9	port9	10/100/1000 MBit RJ45
10	port10	10/100/1000 MBit RJ45
11	port11	10/100/1000 MBit RJ45
12	port12	10/100/1000 MBit RJ45

F600 C Model F10/F20 Port Configuration

Label	OS Notation	Speed/Type	Management Port
1	port1	10/100/1000 MBit RJ45	X
2	port2	10/100/1000 MBit RJ45
3	port3	10/100/1000 MBit RJ45
4	port4	10/100/1000 MBit RJ45
5	port5	10/100/1000 MBit RJ45
6	port6	10/100/1000 MBit RJ45
7	port7	10/100/1000 MBit RJ45
8	port8	10/100/1000 MBit RJ45
9	port9	1 GbE Optical Fiber SFP
10	port10	1 GbE Optical Fiber SFP
11	port11	1 GbE Optical Fiber SFP
12	port12	1 GbE Optical Fiber SFP

F600 C Model E20 Port Configuration

Label	OS Notation	Speed/Type	Management Port
1	port1	10/100/1000 MBit RJ45	X
2	port2	10/100/1000 MBit RJ45
3	port3	10/100/1000 MBit RJ45
4	port4	10/100/1000 MBit RJ45
5	port5	10/100/1000 MBit RJ45
6	port6	10/100/1000 MBit RJ45
7	port7	10/100/1000 MBit RJ45
8	port8	10/100/1000 MBit RJ45
9	port9	10 GbE Optical Fiber SFP+
10	port10	10 GbE Optical Fiber SFP+

The CloudGen Firewall hardware appliances ship with a Quick Start Guide. Follow this guide to connect to your firewall. To protect your network, follow the instructions for the standard deployment.

Hardware Specifications

Warranty and Safety Instructions

Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions

Interface
Model C10/C20	12x 1 GbE RJ45 Ethernet
Model F10/F20	8x 1 GbE RJ45 Ethernet 4x 1 GbE SFP
Model E20	8x 1 GbE RJ45 Ethernet 2x 10 GbE SFP+
USB 2.0	2
Serial console	1 [RJ45]
Data Storage
RAM [GB]	8
Mass Storage
Type	SSD
Size [GB] (models Cxx / Fxx)	180 GB or higher
Size [GB] (models E20)	270 GB or higher
Size, Weight, Dimensions
Appliance weight [kg]	8,0
Carton weight with appliance [kg]	12
Appliance size: width x depth x height [mm]	430 x 450 x 44
Carton size: width x depth x height [mm]	650 x 590 x 200
Form factor	1U Rack Mount
Hardware
Display	Yes
Cooling	Fan
Power supply	Single, internal, Dual hot swap, internal (optional)
Environmental
Noise emission [db/A]	N/A
Operating temperature [°C]	0 to +40
Storage temperature [°C]	-20 to +60
Operating humidity (non-condensing)	5% to 95%
Certifications & Compliance
CE emissions	Yes
CE electrical safety	Yes
FCC emissions	Yes
ROHS compliant	Yes
Power & Efficiency
Power supply type	Internal
Power type [AC/DC]	AC
Input rating [Volts]	100-240
Input frequency [Hz]	50-60
Auto sense	Yes
Wattage / max. power draw [W]	300
Max. power draw (@ 230V) [A]	2.6
Max. heat dissipation [W]	300
Max. heat dissipation [BTU]	1024
Energy efficiency [average]	> 80%

The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks appliance it was delivered with.

LEDs and Acoustic Signals

Your appliance is equipped with a variety of LEDs. The tables below show the different meanings of the different glowing states and acoustic signals:

LED Color	Status	Meaning Installation	Meaning Operation
All LEDs Off	Off	Appliance is powered off or installation has not initialized far enough for LED control when installation is started.	Appliance is powered off.
Power LED front side - GREEN	Steady	Installation was completed successfully, appliance is halted for reboot or installation was not yet initialized far enough for LED control.	Appliance is plugged in and is on.
Disc LED front side - YELLOW	Blinking	Appliance is reading or writing on storage.	Appliance is accessing the internal storage.
Port LEDs - GREEN/YELLOW	Left blinking	Data transfer – Yellow (10/100 Mbps)	Port in use.
	Right steady	-	Port is on.
PSU LEDs - GREEN	Steady	PSU modules connected and running	Power supply unit is up and running.
PSU LEDs - GREEN	Off	Power defective, standby, or shutdown	Power supply unit is off or in standby mode.

Acoustic Signal	Frequency	Meaning Installation
Beep	1 time	Unit starts booting
Beep	3 times	Installation is completed successfully and appliance is halted for reboot. After reboot, one beep indicates booting.

Not all appliances support yellow and/or red LED colors. Depending on the appliance type, the status LED might be on by default and it might take some time during boot and installation to start either blinking or changing the color. Furthermore, the status LED might blink at different frequencies.

Serial Console Port

In order to establish a console connection to the appliance using a serial cable (Revision A: DB9, other revisions: RJ45), you need to configure the serial port on the terminal using the following parameters:

Parameter	Value
Baud	19200
Bits	8
Stop bit	1
Parity	None
Handshake	None

LC Display

Navigating

This security appliance features a key pad with four keys and an LCD panel on the left side of the front panel. These may be used to obtain certain information and to perform certain commands directly on the appliance.

Keyboard Button	Command
Left arrow or Escape key	Navigates back or acts like an Escape key while working in the LCD menu.
Up arrow	Navigates up or increases a value.
Down arrow	Navigates down or decreases a value.
Right arrow or Enter	Navigates forwards or acts like an Enter key for confirming a configuration step.

LCD Display Menu

You may use the LCD display and the keypad to access certain appliance features. Use the up and down keys to navigate through the items of the main menu.
The LCD menu features the following items from top to bottom:

LCD Menu	Meaning
Appliance type, OS version and release number	This is the default display.
IP address and subnet mask	Shows the configured IP address and subnet mask of the appliance.
Time and date	Shows time and date currently configured on the appliance.
Uptime of Barracuda OS	The uptime in days, hours and minutes.
Serial number of the appliance	Unique identifier for the appliance.
Shutdown menu	Enables you to shut down the appliance.
Reboot menu	Enables you to reboot the appliance.
Menu to change the management IP address	Configure the IP address for the management port.
Menu to boot into ART during the next reboot	Enables you to set a flag that will cause the appliance to boot into ART the next time it is rebooted. Once set, this flag can not be deleted through the menu. When rebooted, the appliance will not start Barracuda OS, but ART instead. You may connect to the appliance by using the serial console or by SSH. A Control Center managed box running in ART mode cannot be managed through the CC, although it will build a connection to the CC signaling its presence.