Barracuda SecureEdge Access allows administrators to configure custom Access Agent networks with respect to each point of entry. The Barracuda SecureEdge Agent running on the client connects to the SecureEdge unified cloud UI. In addition, you can enforce agent web filtering policies to the web traffic that the clients connect to via the SecureEdge Agent in order to establish a secure connection to access internal and external company resources. For more information on global Access settings, see How to Configure SecureEdge Access Global Settings.
Configure Access Agent Network
Go to https://se.barracudanetworks.com and log in with your existing Barracuda Cloud Control account.
In the left menu, click the Tenants/Workspaces icon.
From the drop-down menu, select the workspace your SecureEdge Access should be configured for.
In the left menu, click the Access icon, and select Settings.
The Zero Trust Access >Settings page opens.
In the Access Agent Network Configuration section, specify a value for the following:
Use Manual Configuration – Click to enable/disable. When enabled, specify values for the following:
Device IP Range – Enter the device IP range. Note: If you enter 100.64.0.0/10 as your device IP range, or if you enter any public range, you will get an error.
Pool Bitmask – Enter the bitmask of the network pool to allocate each agent access point.
Click Save.
In the CloudGen Firewall Client Certificate section, click Download certificate.
Install this root certificate on all your clients to assure parallel operations with CloudGen Firewall client-to-site setups and SecureEdge Agent Access.