It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus

Barracuda Archive Search for Windows - Auditor

  • Last updated on

You can download and install Barracuda Archive Search on your Windows-based system to allow archive searches without using either the Barracuda Archive Search for Outlook or logging in to the Barracuda Message Archiver web interface.

This article refers to the Barracuda Message Archiver firmware version 5.2 and higher, and Barracuda Archive Search version 5.2 and higher. The administrator must enable Barracuda Archive Search on the USERS > Client Downloads page before you can install the utility.

Install Barracuda Archive Search

Use the following steps to install Barracuda Archive Search:

  1. Log in to the Barracuda Message Archiver, and go to the USERS > Client Downloads page.

  2. In the Barracuda Archive Search section, click Download Now to the right of the Stand-Alone Search Utility to download the .msi installer.

  3. Locate and double-click the .msi file to open the Setup Wizard.
  4. Follow the onscreen instructions to install the utility.

Set Up the Stand-Alone Search Utility

Use the following steps to set up Barracuda Archive Search:

  1. Launch Barracuda Archive Search.
  2. Read and accept the agreement, and click Next. When the setup is complete, click Finish.

  3. If prompted:

    1. Enter the URI of your Barracuda Message Archiver, for example: https://archiver.mycompany.com:8000/

      If you do not know the URI of your Barracuda Message Archiver, contact your administrator.

    2. Enter your Email Address and Password, and then click OK.

You are now ready to search your message archives. Navigate to and launch Barracuda Message Archiver Search. See Understanding Barracuda Archive Search for Outlook Dialog Box to get started.