You can configure the network scan to skip individual or ranges of IP addresses. Wherever possible, you should scan the smallest number of IP addresses which will ensure you still discover all required devices.
- In Service Center, click Configuration > Site Management.
- Click the site for which you want to edit the scan settings.
- Click the Network Discovery tab.
- In the Network Scan (Local Network) section, click Modify.
- In the Scan Settings section, click Add.
- Do one of the following:
- To ignore a single IP address, select the Single option button and type the device IP address in the IP Address box.
- To ignore a range of IP addresses, select the Range option button and type the Start IP Address and End IP Address in the boxes. Type a description, if desired.
- Select the Skip check box.
- Click Save.