You can view a list of devices in Service Center by clicking Status > Devices.
For each device, the Status column displays an icon that indicates its current status:
The device is currently up. | |
The device is currently down. | |
The device is not responding to ICMP ping, but is responding to ARP. This indicates that the device is most likely down, but partially responding. | |
The AMT device's hardware has been configured to respond to ping, and the operating system has been powered off. | |
The AMT device's hardware has been configured to not respond to ping, and the operating system has been powered off. |
Optionally, you can choose to show columns on the Devices page that display the following information:
- Whether SNMP is enabled.
- Whether WMI is enabled.
- Whether SSH is enabled.
- The amount of time the device has been up or down.
To filter the list of devices
- In Service Center, click Status > Devices.
To filter the list, do one of the following:
- To filter by site or service group, from the Browse By list select either Site or Service Group. Then select the site and site group or service group.
- To filter by device role, select a role from the list.
- Use the filter lists under the column headings.
- Type filter criteria in the control under the column heading.
For example, type DT to filter all the devices that contain DT in the device name.
To show the SNMP, WMI, SSH, and Time up/Time down columns on the Devices page
- In Service Center, click Status > Devices.
- Click the gear icon .
- Select the check box beside each column you want to show.
- Click Save.