It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda RMM
formerly Managed Workplace
Overview Documentation Training Certification Materials

Adding or Deleting a Custom Network Service

  • Last updated on

The Network Objects tab provides a list of all Network Services that are available for monitoring. Additional Network Services can be added here, or any that are not in use can be removed.

When you add a custom network service, it becomes available when configuring monitors, but it is not automatically detected by the network scan.

To add a network service to the Service Center database manually

  1. In Service Center, click Configuration > System Settings.
  2. Click the Network Objects tab.
  3. In the Network Services section, click Add.
  4. Type the name of the Network Service in the Name box.
  5. Type the port number in the Port box.

  6. Type the protocol in the Transport Protocol box.

    Only TCP is currently supported.

  7. Type the timeout in milliseconds in the Timeout box.
  8. Click OK.
To remove a network service to the Service Center database manually
  1. In Service Center, click Configuration > System Settings.
  2. Click the Network Objects tab.
  3. Select the check box beside the network service you want to delete.
  4. In the Network Services section, click Delete.
See Also

Adding a Monitor for Network Services