It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Backup

Firmware Upgrade Policy and Supported Versions

  • Last updated on

Firmware Upgrade Policy

Verify you are running at least the Legacy Release firmware to ensure compatibility with the Barracuda Backup Cloud UI and services such as replication.

Firmware versions older than the latest Legacy Release are not supported.

Legacy hardware will not support firmware updates newer than the Legacy Release. Legacy hardware is defined as any Barracuda Backup appliance with a serial number older than 820000.

Energize Updates 

Barracuda Backup requires an Energize Updates subscription for firmware upgrades and Technical Support. Energize Updates are also required to maintain compatibility with the Barracuda Backup Cloud (accessed through login.barracuda.com). Barracuda Backup performs updates to the cloud to maintain compatibility with the latest legacy, general, or early release firmware versions. Barracuda Backup devices with expired Energize Updates running unsupported firmware versions may experience difficulties using the Barracuda Backup Cloud for management as well as services such as data replication.

This does not apply to the local web-based management interface which is accessible for restores or the Local Control management option.

If your Energize Updates Subscription expires, contact Barracuda Networks Sales to renew your subscriptions.

Supported Firmware Versions

Barracuda Backup supports the upgrade to one of the following firmware upgrade policies and versions:

  • Legacy Release – Latest maintenance release for the previous major firmware version.
  • General Release – Latest maintenance release for the current major firmware version.
  • Early Release – Early access to unreleased firmware versions.

Major Firmware

Latest Maintenance Release

Firmware Upgrade

Version 6.6

6.6.05

Early Release

Version 6.6

6.6.04

General Release

Version 6.5

6.5.04

Legacy Release


View Release Notes for information on important firmware updates.

To ensure interoperability with Barracuda Cloud Control, Barracuda Networks recommends running the latest GA firmware on your device. Firmware versions prior to the Legacy firmware version are not supported.

Additionally:

  • Firmware can only be upgraded to the latest versions available (Legacy, General, or Early).
  • If your firmware version is not maintained, you might lose interoperability with Barracuda Cloud Control; the local restore browser remains accessible for data recovery.
  • Fixes for discovered product defects and vulnerabilities are present in each firmware version. However, previous versions are not patched. For this reason, Barracuda Networks recommends staying current with the latest GA firmware version.
  • You must have an active Energize Updates (EU) subscription and run the latest minimum supported firmware (Legacy) for Barracuda Cloud Control support.
  • If your Barracuda Backup product no longer has EU, and there is no intention to renew EU, you can restore from the local UI to manage the system independent of Barracuda Cloud Control.

How to Upgrade Firmware

Important

When the Barracuda Backup firmware is updated, all associated backup agents are automatically updated to the latest build when the scheduled backup runs.

Upon upgrading to a major firmware version, the Barracuda Backup Agent performs a one-off consistency check which can result in a longer running backup schedule.

To upgrade your Barracuda Backup firmware: 

  1. Log into Barracuda Backup, and go to the System > Firmware Settings page.
  2. Click Check for new firmware, and allow the system to check for a newer version of firmware. 
    The result will be based on your chosen Firmware Upgrade Policy:
    1. Legacy Release – Latest maintenance release for the previous major firmware version.
    2. General Release – Latest maintenance release for the current major firmware version.
    3. Early Release – Early access to unreleased firmware versions.
  3. If a new firmware release is available, click Upgrade Now and allow the system to update.

    Note: The upgrade can take several minutes, and in some cases, up to an hour to complete on larger models.


  4. Click Save at the top of the page once the firmware upgrade is complete.