Barracuda Networks offers the following types of images for the Barracuda Web Application Firewall Vx deployment. Follow the instructions for your hypervisor to deploy the Barracuda Web Application Firewall Vx appliance.
Image Type | Supported Hypervisors |
|---|---|
OVF | |
VMX | |
XVA | |
VHD | |
KVM |
Deploy OVF Images
VMware ESX and ESXi 4.x
Use the OVF file ending in -4x. ovf for this hypervisor .
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
From the File menu in the vSphere Client, select Deploy OVF Template.
Select Import from file, navigate to the extracted folder, and locate the Barracuda Web Application Firewall Vx OVF file. Click Next.
Set the network to point to the target network for this virtual appliance.
Follow the recommendations in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx.
Right-click your virtual appliance, select Open Console, and click the green arrow to power it on.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to provision your virtual appliance.
VMware ESX, ESXi 5.x, ESXi 6.x, and ESXi 7.x
Use the OVF file ending in -5x. ovf for the ESXi 5.x hypervisor, use the OVF file ending in -6x.ovf for the ESXi 6.x hypervisor, and use the OVF file ending in -7x.ovf for the ESXi 7.x hypervisor.
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
Launch vSphere Client and select the appropriate resource pool.
From the File menu in the vSphere Client, select Deploy OVF Template.
Click Browse, navigate to the extracted folder, and locate the Barracuda Web Application Firewall Vx OVF file.
Click Next. Verify that you are installing the correct Barracuda virtual appliance. Click Next again.
Enter a name for the virtual appliance. Click Next.
Select the destination storage for the virtual machine. Click Next.
Select a disk format. To ensure maximum stability when deploying your Barracuda Vx appliance, specify the disk format as Thick Provision Eager Zeroed. Click Next .
Map the network to the target network for this virtual appliance. Click Next.
Review the deployment options. Click Finish to deploy the virtual appliance.
Click Finish to deploy the appliance.
Follow the recommendations in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx.
Locate the appliance within the appropriate virtual machine and resource pool. Select it and power it on by clicking the green arrow.
Click the Console tab. You can monitor the appliance as it is prepared for use.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to set up your virtual appliance.
Sun/Oracle VirtualBox and VirtualBox OSE 3.2
Use the OVF file ending in -4x. ovf for this hypervisor .
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
From the File menu in the VirtualBox client, select Import Appliance.
Navigate to the extracted folder and locate the Barracuda Web Application Firewall Vx OVF file.
Select the file and click Next.
On the Import Settings screen, follow the recommendations in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx . Click Finish.
Start the appliance.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to set up your virtual appliance.
Deploy VMX Images
VMware Server 2.x
Use the .vmx and .vmdk files for this hypervisor.
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
Navigate to the extracted folder and move the files ending in .vmx and .vmdk into a folder in your datastore (which you can locate from the Datastores list on your server's summary page).
From the VMware Infrastructure Web Access client's Virtual Machine menu, select Add Virtual Machine to Inventory.
Navigate to the folder in your datastore used in step 2 and select the file ending in .vmx. Click OK.
Follow the recommendations in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx.
Start the appliance.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to set up your virtual appliance.
VMware Workstation 6.x, Player 3.x, and Fusion 3.x
Use the .vmx file for this hypervisor.
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
From the File menu, select Open a Virtual Machine.
Navigate to the extracted folder and select the file ending in .vmx.
Use the default settings and click Finish.
Follow the recommendations in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx.
Start the appliance.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to set up your virtual appliance.
Deploy XVA Images
Citrix XEN Server 5.5+
Use the .xva file for this hypervisor. For XEN Server, you first import the virtual appliance template and then create a new virtual appliance based on that template.
Step 1. Import the virtual appliance template:
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
From the File menu in the XenCenter client, select Import.
Click Browse, navigate to the extracted folder, and select the file ending in .xva. Click Next.
Select a server for the template. Click Next.
Select a storage repository for the template. Click Import.
Select a virtual network interface for the template. Click Next.
Review the template settings. Click Finish to import the template.
Step 2. Create a new virtual appliance:
Right-click the virtual appliance template and select New VM wizard.
Select the virtual appliance template. Click Next.
Enter a name for the virtual appliance. Click Next.
For the DVD drive, select <empty>. Click Next.
Select a home server. Click Next.
Specify the number of virtual CPUs and memory for the virtual appliance. Follow the recommendations in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx . Click Next.
Select a virtual disk. Click Next.
Select a virtual network interface. Click Next.
Review the virtual appliance settings. Click Create Now.
When the virtual appliance is ready, right-click it and then click Start.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to set up your virtual appliance.
Deploy VHD Images
Microsoft Hyper-V 2008
Use the .vhd file for this hypervisor.
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
Navigate to the extracted folder and verify that the HyperV folder contains the following sub-folders:
Snapshots
Virtual Hard Disks
Virtual Machines
In Hyper-V Manager, right-click the VM host and select Import Virtual Machine.
Navigate to the extracted folder, select the HyperV folder, and click Select Folder.
Select Copy the virtual machine and Duplicate all files. Click Import.
Follow the recommendations in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx .
Start the Barracuda Web Application Firewall Vx by right-clicking the virtual machine and selecting Start.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to set up your virtual appliance.
Microsoft Hyper-V 2010, Microsoft Hyper-V 8, 8.1, 2012, 2012 R2, 2016 and 2022
Use the .vhd file for this hypervisor.
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
Navigate to the extracted folder and verify that the HyperV folder contains the following sub-folders:
Snapshots
Virtual Hard Disks
Virtual Machines
In Hyper-V Manager, right-click the VM host and select Import Virtual Machine.
On the Before You Begin page of the Import Virtual Machine wizard, click Next.
On the Locate Folder page:
Click Browse, navigate to the extracted folder, and select the HyperV folder. Click Select Folder.
Click Next .
On the Select Virtual Machine page, click Next .
On the Choose Import Type page, select Copy the virtual machine (created a new unique ID). Click Next.
On the Choose Destination: Choose Folders for Virtual Machine Files page, click Browse to search for the location where you want to store the VM files. Click Next.
On the Choose Storage Folders: Choose Folders to Store Virtual Hard Disks page, click Browse to search for the location where you want to store the virtual hard disks for the VM. Click Next.
For Microsoft Windows 10, you can modify the RAM and Hard Disk space allocations after completing step 12.
On the Configure Memory page, enter a size for the Startup RAM that meets the requirements at Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx . Keep the default settings for the other fields. Click Next.On the Connect Network page, select the network interface that you want to use for management access of the VM. Click Next.
On the Summary page, verify that all the settings are correct. Click Finish.
For Microsoft Windows 10, go to the Actions pane and click on Settings under Barracuda Web Application Firewall. Under Hardware, ensure that their is enough memory and hard disk space as specified in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx .
Start your virtual appliance.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to set up your virtual appliance.
Deploy KVM Images
Nutanix AOS 5.20
Download and expand the Barracuda Web Application Firewall Vx ZIP folder.
From the Home menu, select Settings.
Click Image Configuration and select DISK under Image Type.
Select images under Storage Container.
Select Upload a file and click Browse.
Go to the extracted folder, and select the file ending in .qcom2.
Click Open and then click Save.
Select Virtual Infrastructure.
Select VMs and then select List.
Click Create VM.
Under General Configuration:
Enter a name for the virtual appliance. Example: WAF_testing
Specify the number of virtual CPUs and memory for the virtual appliance. Follow the recommendations in Allocating Cores, RAM, and Hard Disk Space for Your Barracuda Web Application Firewall Vx . Click Next.
Click Add New Disk,
Set Type as Disk and Operation as Clone from Image Service.
Select the WAF Image created in Steps 6 and 7. Click Add.
Set Bus Type as SCSI.
Click Add.
Under Network Adapters (NIC), click Add New NIC.
Select a virtual network interface and click Add.
Click Save.
Now, the VM creation task is submitted. You can go to the task activity bar and check if the VM update task is successful.
Go back to the virtual infrastructure VMs. It should show the new VM.
Click Action and click Power on.
Follow the Barracuda Web Application Firewall Vx Quick Start Guide instructions to set up your virtual appliance.