It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Web Application Firewall

Routes

  • Last updated on

To configure traffic routes that determine routing decisions for a specific Network Group, go to the NETWORKS > Routes page in the web interface. In the Add Route section, select the Network Group, specify values for other fields and click Add.

Static Routes

Create a static route to specify the exact route to a remote network. This allows you to route to an interface that is located on a different subnet.

In the Add Route section, select Static Route as Route Type and specify values for the fields.

IPv6 Static Routes

Create an IPv6 static route using the Add Route section. Select IPv6 as IP Version and Static Route as Route Type.

For further information about configuring routes, access the web interface, and click Help in the section where you desire additional details.

Interface Routes

Create an interface route to specify the interface to use for a remote network. This is useful in the bridge mode where the service IP address is not owned by the Barracuda Web Application Firewall.

In the Add Route section, select Interface Route as Route Type and specify values for the fields. 

IPv6 Interface Routes

Create an IPv6 interface using the Add Route section. Select IPv6 as IP Version and Interface Route as Route Type.

For further information about configuring routes, access the web interface, and click Help in the section where you desire additional details.