It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

F600 Revision D

  • Last updated on
F600 Rev. D Model C10 

F600d.C10_FrontRack.png

F600d.10.back.png

F600 Rev. D Model C20

F600d.C10_FrontRack.png

F600d.20.back.png

F600 Rev. D Model F10

F600d.F10_FrontRack.png

F600d.10.back.png

F600 Rev. D Model F20 

F600d.F10_FrontRack.png

F600d.20.back.png

F600 Rev. D Model E20

F600d.E20_FrontRack.png

F600d.20.back.png

F600 D Standard Model C10/C20 Port Configuration

Port LabelOS NotationSpeed/TypeManagement Port
1port110/100/1000 MBit RJ45X
2port210/100/1000 MBit RJ45 
3port310/100/1000 MBit RJ45 
4port410/100/1000 MBit RJ45 
5port510/100/1000 MBit RJ45 
6port610/100/1000 MBit RJ45 
7port710/100/1000 MBit RJ45 
8port810/100/1000 MBit RJ45 
9port910/100/1000 MBit RJ45 
10port1010/100/1000 MBit RJ45 
11port1110/100/1000 MBit RJ45 
12port1210/100/1000 MBit RJ45 
13port1310/100/1000 MBit RJ45 
14port1410/100/1000 MBit RJ45 
15port1510/100/1000 MBit RJ45 
16port1610/100/1000 MBit RJ45 
E1E110/100/1000 MBit RJ45 
E2E210/100/1000 MBit RJ45 

F600 D Model F10/F20 Port Configuration

LabelOS NotationSpeed/TypeManagement Port
1port110/100/1000 MBit RJ45X
2port210/100/1000 MBit RJ45 
3port310/100/1000 MBit RJ45 
4port410/100/1000 MBit RJ45 
5port510/100/1000 MBit RJ45 
6port610/100/1000 MBit RJ45 
7port710/100/1000 MBit RJ45 
8port810/100/1000 MBit RJ45 
9port91 GbE Optical Fiber SFP 
10port101 GbE Optical Fiber SFP 
11port111 GbE Optical Fiber SFP 
12port121 GbE Optical Fiber SFP 
13port131 GbE Optical Fiber SFP 
14port141 GbE Optical Fiber SFP 
15port151 GbE Optical Fiber SFP 
16port161 GbE Optical Fiber SFP 
E1E110/100/1000 MBit RJ45 
E2E210/100/1000 MBit RJ45 

F600 D Model E20 Port Configuration

LabelOS NotationSpeed/TypeManagement Port
1port110/100/1000 MBit RJ45X
2port210/100/1000 MBit RJ45 
3port310/100/1000 MBit RJ45 
4port410/100/1000 MBit RJ45 
5port510/100/1000 MBit RJ45 
6port610/100/1000 MBit RJ45 
7port710/100/1000 MBit RJ45 
8port810/100/1000 MBit RJ45 
9port91 GbE Optical Fiber SFP 
10port101 GbE Optical Fiber SFP 
11port111 GbE Optical Fiber SFP 
12port121 GbE Optical Fiber SFP 
13port131 GbE Optical Fiber SFP 
14port141 GbE Optical Fiber SFP 
15port151 GbE Optical Fiber SFP 
16port161 GbE Optical Fiber SFP 
17port1710 GbE Optical Fiber SFP+ 
18port1810 GbE Optical Fiber SFP+ 
E1E110/100/1000 MBit RJ45 
E2E210/100/1000 MBit RJ45 

The CloudGen Firewall hardware appliances ship with a Quick Start Guide. Follow this guide to connect to your firewall. To protect your network, follow the instructions for the standard deployment.

Hardware Specifications

Warranty and Safety Instructions

Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions

Interface

Model C10

18 x 1 GbE RJ45 Ethernet

Model F10
  • 10 x 1 GbE RJ45 Ethernet
  • 8 x 1 GbE SFP
Model E20
  • 10 x 1 GbE RJ45 Ethernet
  • 8 x 1 GbE SFP
  • 2 x 10 GbE SFP+
USB 2.02
Serial console1 [RJ45]
System
CPUIntel Core i3, 4 cores
RAM [GB]8
Mass Storage
TypeSSD
Size [GB]240 GB or higher
Size, Weight, Dimensions
Appliance weight [kg]10
Carton weight with appliance [kg]16
Appliance size: width x depth x height [mm]440 x 480 x 44
Carton size: width x depth x height [mm]650 x 640 x 200
Form factor1U Rack Mount

Hardware

DisplayYes
CoolingFan
Power supply

Single, internal (models F600 D.C10 and F600 D.F10),
Dual hot swap, internal (models F600 D.C20, F600 D.F20, and F600 D.E20)

Environmental
Noise emission [db/A]N/A
Operating temperature [°C]0 to +40
Storage temperature [°C]-40 to +75
Operating humidity (non-condensing)10% to 85%
Non-operating humidity (non-condensing)up to 95%
Altitude during operation [m]up to 2000
Certifications & Compliance
CE emissionsYes
CE electrical safetyYes
FCC emissionsYes
ROHS compliantYes
FCC Part 15, Subpart BYes
ANSI C63.4-2014Yes
ICES-003 Issue 6, January 2016 (Update April 2017)Yes
Power & Efficiency
Power supply typeInternal
Power type [AC/DC]AC
Input rating [Volts]100-240
Input frequency [Hz]50-60
Auto senseYes
Wattage / max. power draw [W]
  • 300 (dual) C20, F20, E20
  • 250 (single) C10, F10
Max. power draw (@ 230V) [A]2.6
Max. heat dissipation [W]300
Max. heat dissipation [BTU]1024
Energy efficiency [average]> 80%

The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks appliance it was delivered with.

LEDs and Acoustic Signals

Your appliance is equipped with a variety of LEDs. One of them is the Status LED. It is labeled either with a heart symbol or the term 'Status'. It indicates the appliance’s operational state by changing colors between green and red and by changing between blinking and steady glowing. The tables below show the different meanings of the different glowing states and acoustic signals:

LED ColorStatusMeaning InstallationMeaning Operation

All LEDs Off

Off

Appliance is powered off or installation has not initialized far enough for LED control when installation is started.

Appliance is powered off.

Power LED front side - GREEN

Steady

Installation was completed successfully, appliance is halted for reboot or installation was not yet initialized far enough for LED control.

Appliance is plugged in and is on.
Both Status LEDs front side - GREEN and REDOffInstallation has not initialized far enough for LED control when installation is started.-

Status LED front side - GREEN

Steady

Installation was completed successfully, appliance is halted for reboot.

Appliance is up and running.
Status LED front side - GREENBlinkingNormal installation.Appliance is either booting, shutting down, or performing a system update.

Status LED front side - RED

Steady

-

Appliance is halted and may be disconnected.
Status LED front side - REDBlinkingError during installation.An error has appeared preventing the appliance from entering the up state.
Both Status LEDs front side - GREEN and REDSteady-Appliance is in ART mode.

Disc LED front side - YELLOW

Blinking

Appliance is reading or writing on storage.

Appliance is accessing the internal storage.

Port LEDs - GREEN/YELLOW

Left blinking

Data transfer – Yellow (10/100 Mbps)

Port in use.
Right steady-Port is on.
PSU LEDs - GREENSteadyPSU modules connected and runningPower supply unit is up and running.
OffPower defective, standby, or shutdownPower supply unit is off or in standby mode.
Acoustic SignalFrequencyMeaning Installation
Beep1 time

Unit starts booting

Beep3 timesInstallation is completed successfully and appliance is halted for reboot. After reboot, one beep indicates booting.

Not all appliances support yellow and/or red LED colors. Depending on the appliance type, the status LED might be on by default and it might take some time during boot and installation to start either blinking or changing the color. Furthermore, the status LED might blink at different frequencies.

Serial Console Port

In order to establish a console connection to the appliance using a serial cable (Revision A: DB9, other revisions: RJ45), you need to configure the serial port on the terminal using the following parameters:

ParameterValue
Baud19200
Bits8
Stop bit1
ParityNone
HandshakeNone

LC Display

Navigating

This security appliance features a key pad with four keys and an LCD panel on the left side of the front panel. These may be used to obtain certain information and to perform certain commands directly on the appliance.

Keyboard ButtonCommand
Left

Navigates back or acts like an Escape key while working in the LCD menu.

Up

Navigates up or increases a value.

Down

Navigates down or decreases a value.

Right

Navigates forth or acts like an Enter key for confirming a configuration step.

Enter / CheckEnter key for confirming a configuration step
LCD Display Menu

You may use the LCD display and the keypad to access certain appliance features. Use the up and down keys to navigate through the items of the main menu.
The LCD menu features the following items from top to bottom:

LCD MenuMeaning
Appliance type, OS version and release numberThis is the default display.
IP address and subnet maskShows the configured IP address and subnet mask of the appliance.
Time and dateShows time and date currently configured on the appliance.
Uptime of Barracuda OSThe uptime in days, hours and minutes.
Serial number of the applianceUnique identifier for the appliance.
Shutdown menuEnables you to shut down the appliance.
Reboot menuEnables you to reboot the appliance.
Menu to change the management IP addressConfigure the IP address for the management port.
Menu to boot into ART during the next reboot

Enables you to set a flag that will cause the appliance to boot into ART the next time it is rebooted.
Once set, this flag can not be deleted through the menu. When rebooted, the appliance will not start Barracuda OS, but ART instead. You may connect to the appliance by using the serial console or by SSH. A Control Center managed box running in ART mode cannot be managed through the CC, although it will build a connection to the CC signaling its presence.