It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda CloudGen Firewall
Overview Documentation Training Certification Materials

SC3

  • Last updated on
SC3 Top View
SC3_Top.png

SC3 Front View
SC3_front.png

Default Port Configuration

Port Label

OS Notation

Speed/Type

Management Port

WAN

eth1

10/100/1000 MBit RJ45

(Management Port)

LAN1

eth0

10/100/1000 MBit RJ45

n.a.

LAN2

eth3

10/100/1000 MBit RJ45

n.a.

LAN3

eth4

10/100/1000 MBit RJ45

n.a.

Hardware Specifications

Warranty and Safety Instructions

Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions

The Secure Connector hardware appliances ship with a Quick Start Guide. Follow this guide to connect to your appliance. To protect your network, follow the instructions for the standard deployment.

If required, you can reset the configuration on your Secure Connector hardware appliances. For more information, see Secure Connector Troubleshooting.

Do not operate the appliance simultaneously with both 12V DC and Power over Ethernet (PoE) as parallel power sources. Barracuda Networks recommends to disable PoE if 12V DC is connected.

Power Supply is not included in packaging and needs to be ordered separately (BNGFSCAPSUa / BNGIFSCAPSUa)

To prevent damage, connect the DC plug to the appliance before plugging the power adapter into the AC outlet.

SC3 model

SC30

SC31

SC34

SC35

1x 1GbE WAN (PoE recipient)

Yes

Yes

Yes

Yes

3x 1GbE LAN (switch)

Yes

Yes

Yes

Yes

USB 3.0

Yes

Yes

Yes

Yes

USB OTG

Yes

Yes

Yes

Yes

Wi-Fi (AP or client mode)

No

Yes

No

Yes

3G/UMTS

No

No

Yes

Yes

4G/LTE global

No

No

Yes

Yes

DIN rail mount

Yes

Yes

Yes

Yes

Wall mount

Yes

Yes

Yes

Yes

Metal Case (Magnetic mount)

Yes

Yes

Yes

Yes

Support for Modem M40/M41/M42

Yes

Yes

No

No

Interface

WAN RJ45 Ethernet NICs 

1 x 1 GbE WAN (PoE+ recipient)

LAN RJ45 Ethernet NICs 

3 x 1 GbE LAN switch

USB 3.0

1

Wi-Fi 2.4GHz

Yes

Supported Cellular Networks

GSM

SC34, SC35

UMTS

SC34, SC35

LTE

SC34, SC35

System

 

CPU

ARM Cortex A7

RAM [GB]

2

Mass Storage

 

Type

Micro SD

Size on-board [GB]

8

Size micro SD [GB]

16

Size, Weight, Dimensions

 

Appliance weight [kg/lbs]

1.15 / 2.54

Carton weight with appliance [kg/lbs]

1.85 / 4.08

Appliance size: width x depth x height [in]

3.07 x 5.91 x 4.72

Appliance size: width x depth x height [mm]

78 x 150 x 120

Carton size: width x depth x height [in]

7.48 x 7 x 8.94

Carton size: width x depth x height [mm]

190 x 178 x 227

Form factor

Compact, Din rail

Hardware

Cooling

No fan

Environmental

Noise emission [db/A]

n.a.

Operating temperature [°C/°F]

-4 to +158 / -20 to +70

Storage temperature [°C°F]

-4 to +158 / -20 to +70

Operating humidity (non-condensing)

5% to 95%

MTBF (system)

 

MTBF [yrs.]

> 5

Certifications & Compliance

CE emissions

Yes

CE electrical safety

Yes

FCC Class A

Yes

Power & Efficiency

Aux DC in voltage range (2 pin MC420 3.5mm)

12V - 57V

WAN Port PoE+ Voltage range

37V - 54V 

Compatible PoE+ provider (PSE)

IEEE 802.3at (Type 2) PD

DO NOT USE 12V DC AND PoE ON WAN PORT AT THE SAME TIME

Power Supply (optional)

Power supply

Single, external

Power supply type

External

Power supply input voltage

100 - 240 V, AC

Power supply frequency [Hz]

50 - 60

Power supply output voltage 

12V, DC

Wattage / max. power draw [W]

60

Max. power draw [Amps]

2.5

Max. heat dissipation [W]

60

Max. heat dissipation [BTU]

205

Energy efficiency [average]

> 83%

Packaging Content

Appliance 

Yes

Straight network cable 

Yes

USB Type A to MicroUSB cable 

Yes

External power supply

Optional

Quick start guide

Yes

1x Din rail bracket

Yes

1x two pin power connector

Yes

2x Wi-Fi antenna

SC31, SC35

2x Cellular antenna with 1.5m cable

SC30, SC34

The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks appliance it was delivered with.

Status LEDs

Your appliance is equipped with a variety of LEDs. The table below shows the different glowing states.

Color

Status

Meaning installation

All LEDs Off

Off

Appliance is powered off or installation has not initialized far enough for LED control when installation is started.

Power LED front side (blue)

Steady

Appliance is plugged in an powered on.

VPN LED front side (green)

Steady

Appliance has VPN connection to CloudGen Access Controller.

WAN LED front side (orange)

Steady

Appliance has a connection to the Internet.

WWAN (cellular) (yellow)

Blinking

Appliance has a connection to provider. Only for models with WWAN module.

PSU LEDs - (green)

Steady

PSU modules connected, power supply unit is up and running.

Wi-Fi (AP or Client mode)

Specification

SC31 / SC35

Integrated Wi-Fi (IEEE 802.11b/g/n)

2.4GHz (2412MHz-2462MHz)

Certificates

FCC, CE, RED

4G/LTE

Specification

SC34 / SC35

Frequencies (MHz)

  • GSM 850/900/1800/1900

  • UMTS 850/900/1900/2100

  • LTE 800/850/900/1800/2100/2600

WCDMA/HSDPA/HSUPA Power Class

GSM/GPRS (GMSK) Power Class

  • Power Class 4 (33 dBm) for GSM/E-GSM bands

  • Power Class 1 (30 dBm) for DCS/PCS bands EDGE (8-PSK) Power Class

  • Power Class E2 (27 dBm) for GSM/E-GSM bands

  • Power Class E2 (26 dBm) for DCS/PCS bands

WCDMA/HSDPA/HSUPA Power Class

  • Power Class 3 (24 dBm) for UMTS/HSDPA/HSUPA mode

LTE Power Class

  • Power Class 3 (23 dBm) for LTE mode

Data Rate

LTE cat.4, HSUPA cat.6, HSDPA cat.14, GPRS class12, EDGE class126

SIM Interface

3VDC 6 pin

Certificates

FCC, CE, RED