By default, IPv6 is disabled on the CloudGen Firewall. After enabling IPv6, you must activate the new network configuration and reboot the firewall.
Step 1. Enable IPv6
- Go to CONFIGURATION > Configuration Tree > Box > Network.
- Click Lock.
- In the IP Version section, select the Enable IPv6 check box.
- Click Send Changes and Activate.
Step 2. Activate the Network Changes and Reboot
Go to CONTROL > Box.
In the left menu, expand the Network section and click Activate new network configuration.
Click Activate now.
- In the left menu, expand Operating System and click Reboot Box.
You can now configure and use IPv6 on your CloudGen Firewall or Control Center.