It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

How to Add an IPv6 Management IP Address

  • Last updated on

In addition to the IPv4 management IP address, you can configure an additional box-level IPv6 address to manage your CloudGen Firewall. To use the IPv6 address exclusively, set the IPv4 management address to a loopback address. Creating an additional box-level IPv6 address automatically creates a direct attached route for the IPv6 network.

Before You Begin

Enable IPv6. For more information, see How to Enable IPv6.

Step 1. Add the IPv6 Management IP Address

  1. Go to CONFIGURATION > Configuration Tree  > Box > Network.
  2. In the left menu, select IP Configuration .
  3. Click Lock.
  4. Click + to add an entry to the Additional IPv6 Addresses list. The Additional IPv6 Addresses window opens.
  5. Enter a Name and click OK.
  6. Configure the additional IPv6 address:
    • Interface Name – Select the interface from the list, or click Other and enter the interface name.
    • IPv6 Address – Enter the IPv6 address.
    • Associated Netmask – Select the netmask from the list.
    • Respond to Ping – Select yes for the firewall to respond to ICMP-Echo requests.
    • Management IP – Select yes to use this address to manage your firewall or Control Center.
    ipv6_mgmt_01.png
  7. Click OK
  8. Click Send Changes and Activate. 

Step 2. Activate the Network Configuration

Activate the network changes on the CONTROL > Box page with a Failsafe activation. 

For more information, see How to Activate Network Changes.

You can now connect to the firewall or Control Center using the IPv6 management IP address.

ipv6_login_01.png

ipv6_login_02.png