It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

Updating CloudGen Firewalls and Control Centers

  • Last updated on

Updates, patches, and hotfixes are published in update archives. Depending on the deployment type, the update process differs. The firewall and/or Control Center must be able to access the following Barracuda Networks services to access the downloads:

  • dlportal.barracudanetworks.com
  • d.barracudanetworks.com

Updating a Stand-alone Firewall or Control Center

You can update a stand-alone CloudGen Firewall or Control Center using Barracuda Firewall Admin or on the command line. If the firewall or Control Center can access the Barracuda Networks update servers, download and install the updates directly from the Barracuda Firewall Admin UPDATES element on the dashboard. For units that do not have access to the download server, or if the update is not available in the dashboard element, you can also manually install the update. For flash-based models such as the F10, F100, or F101, it is recommended to update the firewall via command line.

Updating a High Availability Cluster

To avoid downtime when updating a high availability cluster, you must update only the firewall that is in standby and then transfer the services to the updated unit before the firmware is updated on the other firewall as well.

For more information, see How to Update High Availability Clusters or How to Update Managed High Availability Clusters with Automatic Failover.

Updating Managed Firewalls

The Control Center can distribute and install updates on all its managed CloudGen Firewalls. If the Control Center has access to the Internet, all hotfixes, updates, and patches can be downloaded directly to the Control Center. If the Control Center has no Internet connection, you can also manually upload the update archives. The managed firewalls are placed in update groups. The admin can then decide to update a single firewall or an entire update group. When the update archive has been transferred to the firewall, the admin can trigger the update. Copying the update can be scheduled to be performed when it does not impact other traffic.

Since all CloudGen Firewalls in a cluster must have the same firmware version, all the firewalls in a cluster must be updated at the same time. Migrate the cluster configuration after updating the units.

For more information, see How to Update Control Center-Managed CloudGen Firewalls or How to Update Managed High Availability Clusters with Automatic Failover.