Adding Sites, Groups, or Devices to an Execution Schedule

You can add sites, groups, and devices to execution schedules.

Devices can only have one execution schedule applied; if you add a device to an execution schedule that had another execution schedule applied, the newly added execution schedule immediately replaces the previous one.

For best practices on selecting whether to add an execution schedule to a site or a group, see Execution Schedule Best Practices  .

It is not recommended that you apply an execution schedule to a device, as this can become difficult to keep track of and requires more overhead. However, it may be needed if you have one or two devices with very specific schedule requirements.

1. In Service Center, click Configuration > Schedules > Execution.
2. Click the name of an execution schedule.
3. If the advanced configuration is hidden, click Show Advanced Configuration.
4. To apply the execution schedule to sites, do the following:
   1. In the Sites area, click Add.
   2. Select the check box beside each site you want to add.
   3. Click Save.
5. To apply the execution schedule to groups, do the following:
   1. In the Groups area, click Add.
   2. From the Group  Type list, select Service  Groups or Site  Groups.
   3. Select the check box beside each group you want to add.
   4. Click OK.
6. To apply the execution schedule to devices, do the following:
   1. In the Devices area, click Add.
   2. Use the filters to narrow the list of devices, and click Filter.
   3. Select the check box beside each device you would like to add.
   4. Click OK.
7. Click Save.