It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see for further information on our EoS policy.


  • Last updated on

The Barracuda NG Firewall is available in multiple hardware models to meet different networking requirements, ranging from the Barracuda NG Firewall F10 for small or home offices to the Barracuda NG Firewall F1000 for large data centers.

Step 1. (Optional) Install the NG Firewall or NG Control Center in a Rack

Some Barracuda NG systems are desktop sized, the larger models can be mounted in a standard size racks.

For more information, see Rack Installation for Barracuda Appliances.

Step 2.  Management Ports

The management port for the Barracuda NG Firewall differs depending on the model. Connect the management port to the network the management PC is in.

Hardware SystemManagement PortWAN Port
Barracuda NG Firewall F10 - F30xPort 1Port 4
Barracuda NG Firewall F400 - F600Port 1-
Barracuda NG Firewall F800MGMT port-
Barracuda NG Firewall F900MGMT port-
Barracuda NG Firewall F1000MGMT port-

Step 3. Complete the Quick Start Guide

Every Barracuda NG Firewall or NG Control Center appliance is shipped with the Quick Start Guide. Complete all the steps listed in the Quickstart Guide for the Standard Deployment Mode.

Next Steps

To start log-in and configuration of your Barracuda NG, see Getting Started.

Last updated on