It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda CloudGen Firewall
Overview Documentation Training Certification Materials

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see https://campus.barracuda.com/doc/71862301/ for further information on our EoS policy.

The Barracuda NG Firewall Authentication Client

  • Last updated on

To automate Offline Firewall Authentication, use the Barracuda NG Firewall Authentication Client. After installing the client application, the user will be automatically logged in to the firewall authentication service every time they log into Windows. The Barracuda NG Firewall Authentication Client can automatically start with Microsoft Windows and will run until you close the client by selecting Exit from the tray menu icon. The active firewall authentication will time out once the client is closed.

In this article:

Installing the Barracuda NG Firewall Authentication Client

Install the Barracuda NG Firewall Authentication Client and configure the settings for your Barracuda NG Firewall. You can download the application from the Barracuda Website. 

During installation, the Barracuda NG Authentication Client copies the connection settings from Internet Explorer. If you must change proxy settings, change the settings in Internet Explorer; do not change the proxy settings in the Barracuda NG Authentication Client application.

  1. Launch the Barracuda NG Firewall Authentication Client on your system.
  2. Click Next.
  3. Accept the license agreement and click Next.
  4. In the Internet Options window, enter the URL of your Barracuda NG Firewall authentication page.
    auth_opt.png
  5. Click Next to finish the installation.

You can now log in to the Barracuda NG Firewall using the Barracuda NG Authentication client.

Auth_Client01.png

Change the Barracuda NG Firewall Authentication Page 

To configure the authentication URL after the authentication client has already been installed:

  1. Open the Barracuda NG Firewall Authentication Client.
  2. Open the Tools > Options page.
  3. Enter the URL of your Barracuda NG Firewall authentication page.
  4. Click OK.

The URL is the internal IP address used as the Destination in the App-Redirect firewall rule. For more information, see How to Configure Offline Firewall Authentication.


Last updated on
Previous Article Next Article