We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see https://campus.barracuda.com/doc/71862301/ for further information on our EoS policy.

How to Apply Traffic Shaping to a VPN Tunnel

  • Last updated on

If you want to configure Quality of Service for a virtual interface as in this example, a VPN tunnel, adapt the traffic shaping configuration.

Assign a QoS Profile to a VPN Tunnel 

  1. Create a TINA VPN Tunnel.
  2. Configure the traffic shaping settings.
  3. Open the Site to Site page (Config Full Config > Box > Virtual Servers > your virtual server > Assigned Services > VPN-Service > Site to Site).
  4. Open the TINA Tunnel configuration window.
  5. Click the TI - Bandwidth Protection tab.
     qos_tina.png
  6. From the Bandwidth Policy list, select Assign QoS Profile
  7. From the Assigned QoS Profile list, select your QoS profile.
  8. In the Estimated Bandwidth field, enter the maximum rate for outbound traffic in KB/s. If you enter 0, no shaping occurs.
  9. In the Reverse field, enter the maximum rate of inbound traffic in KB/s. If you enter -1, the same maximum rate is used for outbound and inbound traffic.
  10. Click OK.
  11. Click Send Changes and Activate.
  12. Create the firewall rules for the VPN tunnel traffic. For more information, see How to Create Access Rules for TINA Site-to-Site VPN Access.
Last updated on