The following sections provide information on how to configure Barracuda NG Admin settings using the Barracuda NG Admin User Interface configuration. The configuration menu is accessible by clicking the Options tab in the top left corner of the window, and then selecting Settings.
In this article:
To configure the connection and display for Barracuda NG Admin, you can specify the client settings according to your requirements.
Enable Compression activates or deactivates data compression for Barracuda NG Admin connections (Default: inactive) and increases efficiency just like responsive management, especially over 'thin' lines. This feature is backward-compatible. Even older Barracuda NG Firewall releases not capable of handling compressed management connections can still be properly connected. When compression is active, the connection status icon in the top right corner changes to an icon with a cyan background.
Click Advanced Cryptographic Settings to edit the following advanced crypto API settings:
- Disable Smartcard /Token – Selecting this checkbox deactivates the advanced cryptographic API settings.
- Cryptographic Service Provider – Barracuda Networks supports all cryptographic service providers (CSPs) using the Microsoft crypto API. All CSPs installed on your local workstation are listed.
- Key Length – The key length depends on the selected CSP. Minimum, maximum, and default values for key lengths are displayed in the Cryptographic Service Provider list.
- Default Store – The default store for certificates (defaults to MY).
- Specifies the provider type – The place where the certificate is living. You can select one of the following settings:
- CERT_STORE_PROV_SYSTEM – Certificate available in MS Management Console.
- CERT_STORE_PROV_PHYSICAL – Certificate available on eToken/Smartcard.
- Flags – Availability of the certificate. Possible values are 'current user only' or 'local workstation', regardless of the logged-in user. You can select one of the following settings:
- CERT_SYSTEM_STORE_CURRENT_USE – Certificate is dedicated to this user only.
- CERT_SYSTEM_STORE_LOCAL_MACHINE – Certificate is dedicated to local workstation.
- Select Smartcard Reader – If smartcard readers are available, you can select one from this list. If the list is inactive, there are no smartcard readers available.
Use SPoE as default – Use SPoE as default if Barracuda NG Admin should use a Single Point of Entry for the connection with the Barracuda NG Firewall or Control Center. Default SPoe is port 807. This can be required, e.g., when deploying the Barracuda NG Firewall on Windows Azure.
Socket Connect Timeout – Duration in seconds that a login attempt may last until it is stopped due to failure and an error message is displayed (Default: 6 seconds).
Configuration Read Timeout – Duration in seconds that a connection attempt (through use of the Connect button) may last after a failure until it is stopped and an error message is displayed (default: 30 seconds). In addition, this setting also determines the read timeout of the configuration file on the Box Control > Licenses page. For more information, see Licensing.
Statistic Timeout – Duration in seconds that a statistic view attempt may last until the attempt is stopped on error and an error message is displayed (Default: 30 seconds). Increase this setting if you expect large statistics files.
Max. Automatic Reconnects – The maximum time Barracuda NG Admin automatically reconnects after a session has been interrupted, e.g., in case of connection attemps during updates.
- Disable Windows 7 taskbar preview – To disable the taskbar preview in Windows 7, select this check box.
- Disable Events System Tray Icon – To disable the icon in the system tray that indicates an active event, select this check box.
- Always use Session Password – To always use the last known password when reconnecting to a system after a session has been disconnected, select this check box. The password is only saved until you close Barracuda NG Admin.
- Switch tab title order – To invert the labeling of opened tabs, select this check box. Either the system name or the system IP address will be on top.
- Print Header – In this field, you can enter a custom header for prints. A header is especially useful for identifying owners when multiple administrators use one printer.
Specifies how the date and time are formatted in various overview listings (for example, CC Control).
- Advanced Mode Configuration – To activate Advanced Configuration Mode throughout the client, select this check box.
- Enable Configuration Scripting – To enable the functionality to script the configuration, select this check box.
- Show Simple Configuration at startup – To show Simple Config at startup, select this check box. To show the Full Config (Config Tree) at startup, clear this check box.
- Read Only Colour – To define the background color for configuration files in read-only mode, click Read Only Colour.
FW Rule Editor
- Maximum number of network objects to fill into source and destination Combo Box – Defines the maximum number of network objects to be listed for Source and Destination when creating firewall rules. You can leave this setting as default.
Behavior on Slow Connection
- Do always automatic data refresh on activation and timer intervals – If enabled, content of the user interface will always be automatically refreshed.
- Disable automatic data refresh for Box/CC Connections slower than <value> Latency in ms – In this field, specify a threshold in milliseconds after which automatic data refresh is disabled for connections. The Barracuda NG Firewall or Control Center connection will be probed on the first connection attempt.
- Disable Keyboard Navigation by <Alt> Key – To display the keyboard navigation when you press Alt, select this check box.
- Show Big Symbols – To display large icons in the ribbon bar, select this check box.
- Restore Dialog Positions, Restore List Columns, Restore Config Element Sizes – To restore default settings, click the corresponding button.
Custom IP Lookup Link
- Disable Custom IP Lookup Link in Firewall Live and History. Takes effect with next opened session! – To disable the custom IP lookup link in the Firewall > Live and History view, select this check box.
IPv4 Lookup URL – In this section you can enter an HTTP/S URL to perform a custom IP address lookup (for example whatismyipaddress.com). By default, IP addresses are looked up at http://www.barracudalabs.com.
<ipv4 addr> – The IPv4 address.
External SSH Client
- Command to open SSH-Client – In this field, enter the command to open the SSH-client. Use %IP address and %user to dynamically insert IP addresses and login name. Format: 'path' parameters. e.g., 'C:\putty.exe' %user@%IP address.
- Anonymize IP Addresses on Printing – When selecting this check box, IP addresses are anonymized by replacing the last 4 digits by xxx. E.g., 80.90.100.xxx when printing lists.
Use Netmask Notation – From this list, you can select either the CIDR or Inverted CIDR (phion) netmask notation. (Default: CIDR). The inverted CIDR notation, which may be used for configuration purposes within Barracuda NG Firewall, is different from the CIDR netmask notation. As a rough guide, keep in mind that the higher the inverted CIDR notation, the bigger the network (in contrary to CIDR notation). Some log files may still use the inverted CIDR notation, but generally CIDR notation is used. The inverted CIDR notation can be calculated as follows:
Inverted CIDR = 32 - CIDR
Quad CIDR Inverted CIDR
Expanding the Barracuda Activation dropdown menu lets you configure the settings for Barracuda Activation. The settings in this section control the behavior or completely disable the Barracuda Activation process.
- Policy for Contact Information – From this dropdown list you can select from the following options:
- Do not store. Ask every time – Does not store customer information locally. For each license activation, the user information needs to be entered.
- Store, but ask for confirmation – Stores customer information locally. The information does not need to be entered for each activation, but needs to be confirmed instead.
- Store and use always automatically – Stores customer information locally.
- CC: Create PAR Files – With the checkbox enabled, no warning will be displayed on creation of box PAR files without configured serial numbers.
- Proxy Settings – With the checkbox enabled, proxy settings configured in Internet Explorer will be inherited to the client.
Admin and CC Settings
When expanding the Admin and CC Settings section, you can configure the password and key for administrators of Barracuda NG Control Centers and standalone Barracuda NG Firewalls.
Configure Standalone Barracuda NG Firewall Admin Settings
To configure the administrator settings for a standalone Barracuda NG Firewall:
- From the list below the Legacy Configuration section, select Change Admin Credentials for Local Admin (Single Box).
- In the Box IP Address field, enter IP address of the firewall.
- In the Change Administrator Password section, you can change the password.
- In the Change Administrator Key section, you can change the keys.
Configure Barracuda NG Control Center Admin Settings
To configure the administrator settings for a Barracuda NG Control Center:
- From the list below the Legacy Configuration section, select Change Admin Credentials for CC Admin.
In the CC Selection section, select the Barracuda NG Control Center. In the Address field, the IP address of the system appears.
- To view the certificate for the system, click Show Certificate.
- In the Change Administrator Password section, you can change the password.
In the Change Administrator Key section, you can change the keys.
Certificates and Private Keys
This dropdown menu contains the private key administration. Login and authentication of the administrator on a Barracuda NG Firewall are processed using a two-factor authentication technique. The authenticity of the admin workstation is verified using a challenge-response method. In addition to this, administrators must authenticate themselves using a personal password.
Creating a Certificate
In order to generate a new certificate/key by using Microsoft Strong Cryptographic Provider v1.0, click Create New Certificate/Key. This opens a window requiring several values to be entered. After confirming your entry, the new certificate will be displayed in the list. The columns within the main tab derive from the information entered while creating the certificate. However, two columns differ:
- Hash – Contains short information concerning the key in order to make it easier to verify whether keys are equal or not.
- Key Container – Displays the unique name of the CSP key container.
To delete a certificate, select the required certificate in the list and click Delete Certificate/Key.
Using Keys on a Barracuda NG Firewall
Keys in PEM format cannot be used on Barracuda NG Firewall systems. However, Barracuda NG Admin enables conversion of already existing keys into certificates. If you have older keys sitting in your registry, Barracuda NG Admin provides an additional button within this dialog named Migrate Keys to Cert. Click this button to open a password request for the available keys. After entering the proper password, the keys are converted into certificates. The subsequent dialog (Registry Keys converted to Microsoft Certificate Management - Remove Registry Keys?) offers two options:
- Yes – Removes the keys in PEM format from the registry.
- No – Keeps the keys in PEM format in the registry.
Public Host Keys
When expanding the Public Host Keys dropdown field, the following sections are available:
This section shows all Barracuda NG Firewalls that were previously accessed using this computer. The list includes the box IP address, a short hash of the key, and the unique box fingerprint. Use the Remove Selected option for deleting a selected entry from the list. A security request will pop up the next time you log into the box. The Import PEM option allows you to import PEM files. Security is increased by using certificates in this place, at the same time a security request is avoided.
SSH Keys Section
This section shows all Barracuda NG Firewalls that were previously accessed using an SSH connection from this computer. The list includes the SSH IP address and the unique SSH fingerprint. In addition to the Remove Selected and Import PEM options (both having the same purpose as described above), the Enter Finger Print option is also available here. Click to enter the unique fingerprint and the corresponding IP address manually into a dialog box.
This dropdown menu offers you an option to install the currently running instance of Barracuda NG Admin into the so-called Global Assembly Cache (GAC), to uninstall it again from there, and to delete further instances that have been detected on the workstation. Usually, there is no need to install Barracuda NG Admin at all as the executable may simply be copied to and executed on a workstation fulfilling the hardware and OS requirements without requiring any further preparations.