We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see https://campus.barracuda.com/doc/71862301/ for further information on our EoS policy.

How to Move, Copy and Delete Barracuda NG Firewalls

  • Last updated on

You can freely move, copy or delete managed Barracuda NG Firewalls on the NG Control Center. When moving or copying systems which link to a repository make sure the repository is also available from the destination node, or the links to the repository will be broken and replaced by a copy of the repository configuration instead.

In this article:

Move a Barracuda NG Firewall without Links to a Repository

  1. In the Config Tree, navigate to the Barracuda NG Firewall that you want to move.
  2. Right-click the Barracuda NG Firewall and select Lock.
  3. Right click the Barracuda NG Firewall and select Move Box.
  4. Select the new location and enter a new name for the Barracuda NG Firewall. The name cannot contain more than 25 characters.
  5. Click OK. The Barracuda NG Firewall is then moved.

Moving a Barracuda NG Firewall with Links to a Repository

Moving a Barracuda NG Firewall configuration with links to a How to Set Up Repositories the links may break when moving the system depending on whether it is a global, range or cluster repository. The settings on the previously linked configuration pages will be saved, but the pages are no longer linked to the repository. 

RepositoryMove or Copy to a Different Range
Move or Copy to a Different Cluster
GlobalLink remains Link remains 
Range Link is brokenLink remains 
Cluster Link is brokenLink is broken

Remove a Barracuda NG Firewall

A Barracuda NG Firewall that has been removed from the Barracuda NG Control Center does not automatically become a standalone system. If you want to use the removed Barracuda NG Firewall as a standalone system, you must reconfigure it.

  1. In the Config Tree, navigate to the Barracuda NG Firewall that you want to remove.
  2. Right-click the Barracuda NG Firewall and select Lock.
  3. Right-click the Barracuda NG Firewall and select Remove Box.
  4. Click OK.

After the Barracuda NG Firewall has been removed, the box entry should disappear from the CC status map with the next configuration update. If the entry stays on the system:

  1. At the command line, enter the following commands:
    find /opt/phion/rangetree/configroot/ -name box.dbconf | xargs rm
    conftool r - rebuild_db
    conftool r - rebuild_cache
  2. Restart the CC Rangeconf service.
Last updated on