It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see for further information on our EoS policy.

How to Configure Global HTTP Proxy

  • Last updated on

Configure the global HTTP proxy settings for the Barracuda NG Firewall. Select the unit's Internet connection and specify the connection details and authentication settings.

Configure HTTP Proxy Settings

  1. Open the Administrative Settings page (Config > Full Config > Box).
  2. Click Lock.
  3. In the left navigation pane, select HTTP Proxy.
  4. Select the Internet Connection Type for the system. If you are using a proxy server to connect, select HTTP/S. Only select Direct Access if the system is directly connected to the Internet.
  5. Enter the IP address of your proxy server and specify the listening port for the proxy.
  6. In the Proxy User and Password sections, enter the HTTP/S proxy user credentials for proxy authentication.
  7. In the Proxy User Domain field, enter the domain for the HTTP proxy user.

  8. To join a domain, go to the Control > Box page. From the Domain Control menu in the left navigation pane, click Register Proxy at Domain.

    Note: Not all services use NTLM or MS-CHAPv2 authentication.

  9. Click Send Changes and Activate.
Last updated on