It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see for further information on our EoS policy.

How to Change the Management IP Address

  • Last updated on

When deploying the Barracuda NG Firewall in your network, you might have to change its management IP (MIP) address. After changing the management IP address, you must activate the new network configuration. 

Step 1. Change the MIP Address

Change the management IP address to match your existing network addresses.

  1. Go to CONFIGURATION > Configuration Tree > Box > Network.   
  2. Click Lock.
  3. In the Management IP and Network section, enter the new Management IP (MIP).
  4. Select the Associated Netmask for your network from the list.
  5. (optional) Set Responds to Ping to yes
  6. Set Use for NTPd to yes.
  7. Click Send Changes and Activate. 

Step 2. (optional) Change or Add Gateway Route

If the client from which you are connecting to the Barracuda NG Firewall is not in the same network as the Barracuda NG Firewall, you must create or change a gateway route to be able to access the Barracuda NG Firewall after changing the management IP address. You do not need to add a route if your client is in the same network as the new management IP address.

For more information, see How to Configure Gateway Routes.

Step 3. Network Activation

After you create or change basic network configurations, you must activate your new network configuration:

  1. Go to CONTROL > Box.
  2. In the left menu, expand the Network section and click Activate new network configuration.
  3. Select Force. The 'Force Activation Succeeded' message is displayed after your new network configuration has been activated.
  4. Restart Barracuda NG Admin.

A few moments after activating your network configuration changes, you will be able to log into the Barracuda NG Firewall with the new MIP address. If you are using a static IP, verify that the management PC can reach the new MIP.

Last updated on