We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see https://campus.barracuda.com/doc/71862301/ for further information on our EoS policy.

How to Deploy a Barracuda NG Vx OVA Image on VMware Hypervisors

  • Last updated on

If you are deploying the Barracuda NG Vx in a high performance environment or require support for VLANs, do not deploy using the OVA packages. Instead, create a custom configuration using Barracuda NG Install. For more information, see How to Deploy a Barracuda NG Vx using Barracuda NG Install on a VMware Hypervisor.

To ease deployment, the Barracuda NG Vx units are available as prebuilt OVA images that can be imported into your VMware hypervisor. You do not need to create or configure a virtual machine (VM). 

Before deploying the Barracuda NG Vx unit, verify that the host system meets the minimum storage requirements and review the resource recommendations for the production system.

You can deploy the Barracuda NG Vx unit using either the VMware vSphere Client or the VMware OVF Tool (ovftool).

In this article:

Before You Begin

Use the VMware vSphere Client

Step 1. Download and Import the OVA Image
  1. Download the OVA image for your Barracuda NG Firewall or Barracuda NG Control Center from your Barracuda Networks Account.
  2. Connect to your VMware hypervisor using the vSphere client.
  3. Click File Deploy OVF Template.
    Deploy_Template.png
  4. In the deployment wizard, click Browse and select the OVA image. Click Next to proceed. 
  5. Enter a name for the virtual machine to be created. Click Next to proceed.
  6. Select the datastore that the Barracuda NG Vx unit should be installed on.

    When you import an OVA file with VMware 4.1 and later, you are offered the Thin provisioned format setting that lets you change the VM size. If you choose to reduce the VM size, do not choose a value below 50 GB for VFxxx or a value below 100 GB for VC400, VC610, or VC820. Barracuda Networks recommends that you select Thick provisioned format.

    Disk_Format.png

  7. Map to the required network in your existing inventory and then click Next to proceed.
    Network_Mapping.png
  8. After the deployment wizard summarizes all your settings, click Finish to start the deployment process. After successful deployment, the Barracuda NG Vx unit is displayed in your VMware hypervisor inventory list.
  9. Select the Barracuda NG Vx unit from the list on the left  and edit settings such as Disk Provisioning with appropriate values.
Step 2. Turn On and Configure the Barracuda NG Vx Unit
  1. Turn on the Barracuda NG Vx unit and click the Console tab of the virtual machine. 
    The Barracuda NG Vx unit begins to boot.
    virtual-boot.png
    For a basic network configuration, the Barracuda NG Vx unit launches the Active Recovery Technology menu.
    ART_Console.png
  2. Select Basic Configuration, enter the following network settings, and then press F3 to save your changes:
    • Hostname The desired hostname for your Barracuda NG Vx unit.
    • Management IP – The IP address that your Barracuda NG Vx unit should be reachable through.
    • Netmask – The subnet mask in dotted quad notation. For example, 255.255.255.0.
    • Default Gateway – The IP address of the next hop device that serves as an access point to another network.
  3. When the window opens to announce that your configuration changes were saved, press any key to continue.
  4. Select Reboot to restart the Barracuda NG Vx unit with the new network configuration.

Use the VMware OVF Tool

  1. Download the VMware OVF Tool from vmware.com. Use the following command: 
    ovftool -datastore=datastorename ovaimage vi://server-ip 
    where:
    • datastore – The name for the data store.
    • ovaimage – The path and name of the OVA file.
    • server-ip – The IP address for the virtual appliance.
  2. Configure the resources pool and the network mapping within the VMware virtual machine settings.
  3. Using Barracuda NG Admin, connect to the virtual appliance for configuration.

Use the latest version of Barracuda NG Admin. If you configure the Barracuda NG Firewall with a version of Barracuda NG Admin that is older than the firewall version, you might lose configuration data.

Next Step

After you deploy the Barracuda NG Vx unit, continue with Getting Started and optionally Best Practice - Performance Tuning on VMware Hypervisors.

Last updated on