We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see https://campus.barracuda.com/doc/71862301/ for further information on our EoS policy.

How to Configure an Access Rule for a Client-to-Site VPN

  • Last updated on

To connect your routed client-to-site VPN to your network, you must add a forwarding access rule to direct traffic between the tunnel, the remote and the home network.

In this article:

Before You Begin

Before creating your forwarding access rules, gather the following information:

  • The network address for the VPN service (e.g., 10.0.0.2)
  • The VPN client network (e.g., 192.168.6.0/24)

Step 1. Create a Static Network Object

Create a static network object for the VPN client network

TypeNameInclude Entries
Generic Network Object (IP, Network, Ranges)VPNClientNetworkVPN Client Network (e.g., 192.168.6.0/24)

For more information on how to create Network Objects, see How to Create Network Objects.

Step 2. Add a Pass Firewall Rule

  • Source – The VPN network subnet (e.g., VPNClientNetwork).
  • Bi-directional – Select this check box.
  • Destination – The local network (e.g., 10.0.0.0/24).
  • Connection Method – From this list, select No Src NAT [Client].
Last updated on