We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

How to Create and Apply SC Templates

  • Last updated on

Because the Barracuda Next-Gen S-Series is geared toward large deployments with many SC clients, templates are used to simplify and reduce the configuration overhead. Templates allow you to define configuration settings the SCs have in common. The administrator decides which settings are device-specific and which settings are changed globally for all SCs associated with the template. The template assigned to the SC can be changed at will. It is also possible to remove the association with a template to allow all settings to be changed on a device, or to switch to another template, with different preset configuration settings. Changes to the template are automatically pushed out and updated on the SCs. For troubleshooting purposes, you can override template settings directly on the web interface of the SC. The following parameters are device-specific and cannot be set via the template:

  • Unique Appliance Name
  • VPN certificates

In this article:

Create a New SC Template

  1. Go to your S-Series cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Click Add Template. The Create Template window opens.
    sca_templates_00.png
  4. Click OK.
  5. Click Activate.

Apply an SC Template to an SC

Applying a template to an SC overwrites the existing settings for the values configured in the template.

  1. Go to your S-Series cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.

  3. In the SC List column, right-click on the SC and select Move to Template.
  4. Select the template from the drop-down Template List, and click OK.
    sca_templates_02.png
  5. Click Activate.

Delete an SC Template

Deleting a template that is in use by SCs unlocks the configuration settings previously locked by the template.

  1. Go to your S-Series cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Right-click on the template, and select Delete Template.
  4. Click Activate.

Export an SC Template

Each template can be exported to a template file.

  1. Go to your S-Series cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Right-click on the template, and select Export Template.
  4. Enter a File name. E..g, MyExampleTemplate.template
  5. Click Save

Import an SC Template

Import an SC template. Each template file can only be imported once.

  1. Go to your S-Series cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Click Import Template.
  4. Select the template file. E..g, MyExampleTemplate.template
  5. Click Open.
Last updated on