We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

This firmware version will reach End-of-Support on 31.12.2018. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

Network

  • Last updated on

The box layer network subsystem of the Barracuda NextGen Firewall F-Series and NextGen Control Center provide all basic features related to network connectivity, such as WAN connections, network traffic, routing, or VLAN.

Connecting to the Internet - WAN Connections

The F-Series supports various types of Internet connections. If multiple ISP connections are used, the F-Series offers granular control over link and loadbalancing either on a per-access rule basis or via route metric. You can configure the following Internet connections:

  • Static IP addresses
  • Dynamic IP addresses (DHCP)
  • xDSL with PPPoE and PPTP
  • UMTS/3G using the external Barracuda USB Modem 
  • ISDN

For more information, see WAN Connections

Routing

Routing tables are used to store the best path to a remote network. The F-Series uses the routing tables to forward traffic to the correct interfaces, next hop gateways, or VPN tunnels. The destination, route metric, and source address (optional) of an IP packet is used to determine which route matches and where the packet is forwarded to.

For more information, see Routing.

VLAN

VLANs allow you to split one physical network interface into several virtual LANs. The physical interface behaves as if it were several interfaces, and the switch behaves as if it were multiple switches. The F-Series can use up to 256 VLANs on one physical network interface and a maximum of 4096 VLANs globally.

For more information, see How to Configure VLANs.

Management IP Address

The management IP address is used to connect and manage the F-Series or the box level of the NextGen Control Center. It is located on box level and is thus independent from the virtual server and services running on the F-Series Firewall. Routes for the management network are automatically introduced and do not need to be configured separately. The management IP address can be changed to match you network.

For more information, see How to Change the Management IP Address.

Network Interfaces

Hardware systems are automatically configured with the correct number of network ports and interfaces. For hardware systems with Barracuda network modules or virtual systems, it may be necessary to add additional network interfaces. These network interfaces must also be added to the configuration of the F-Series Firewall. If you are planning to use VLANs, make sure to use Barracuda network modules or virtual network adapters that use kernel modules with VLAN support.

For more information, see How to Add Additional Network Interfaces

IPv6

The F-Series supports the use of IPv6 for selected services. Enable IPv6 for the F-Series Firewall or NextGen Control Center to accept IPv4 and IPv6 traffic.

For more information, see How to Use IPv6

Advanced Network Configurations

Last updated on