We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

Wi-Fi AP Authentication Ruckus Wireless Configuration

  • Last updated on

To authenticate users connected to Ruckus access points, you must stream the syslog containing the authentication data to the Barracuda NextGen Firewall F-Series.

Reference Devices/Versions: 

  • ZoneDirector 1100 (ZD1106) Version 9.10.0.0 build 21

  • ZoneFlex zf7321-u Access Point):

Step 1. Enable Syslog Streaming on the Ruckus Wireless AP

Enable Client Association in the debug log settings.

  1. Go to Administer > Diagnostics.
  2. In the Debug Logs section, enable Client Association.
  3. Click Apply
    ruckus01.png

Step 2. Enable Syslog Streaming on the Ruckus Wireless AP

  1. Go to Configure > System Log Settings.
  2. Enable the Remote Syslog 
  3. Enter the IP address of the Barracuda NextGen Firewall F-Series. 
    ruckus02.png
  4. Click Apply.

Verify that the Barracuda NextGen Firewall F-Series is receiving the Syslog Data

On the Barracuda NextGen Firewall F-Series, go to LOGS and open the Box > Control > AuthService_wifiap.log. After a successful authentication, you will see a logged in user <username> with IP <IP address> line in the log.
wifi_log_message.png

Last updated on