It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

How to Configure an Access Rule for a Client-to-Site VPN

  • Last updated on

To connect your routed client-to-site VPN to your network, you must add a forwarding access rule to direct traffic between the tunnel, the remote and the home network.

In this article:

Before You Begin

Before creating your forwarding access rules, gather the following information:

  • The network address for the VPN service (e.g., 10.0.0.2)
  • The VPN client network (e.g., 192.168.6.0/24)

Step 1. Create a Static Network Object

Create a static network object for the VPN client network

TypeNameInclude Entries
Generic Network Object (IP, Network, Ranges)VPNClientNetworkVPN Client Network (e.g., 192.168.6.0/24)

For more information on how to create Network Objects, see How to Create Network Objects.

Step 2. Add a Pass Firewall Rule

  • Source – The VPN network subnet (e.g., VPNClientNetwork).
  • Bi-directional – Select this check box.
  • Destination – The local network (e.g., 10.0.0.0/24).
  • Connection Method – From this list, select No Src NAT [Client].
Last updated on